>>>Three principles for saving money in home decoration Many people who have experienced renovations feel that it is difficult to control the cost of home improvement. After renovation, they often exceed the expected cost. If you want to control home improvement costs, the control of material costs is the key. In the home improvement process, the following points should be made: Plan the budget carefully If you do not design or have a simple design, you can hardly save money if you change it. For sanitary ware, ceramic tile, wooden floor, cabinets and other materials that need to be purchased, it is necessary to estimate the required quantity and plan the planned input costs so that there will be a psychological price bottom line when purchasing the main materials to determine the basic material selection range. Comparing three selected materials The quality of decorative materials is divided into upper, middle, and lower grades, but materials of the same grade will have different prices due to different sources. In the purchase should pay attention to the cost of materials, a lot of material functions, high prices, then we must consider whether these extra functions are useful, whether it is worth the money. Skillfully use promotion money Doing a good job of planning and purchasing materials using the promotion policies of holiday businesses is also a good way to save money. In places with major renovations, high-grade materials can be used for fine workmanship, so that it seems to have a higher style. Other parts of the renovation can take a simple, crisp approach, the generalization of materials, work simplification. Eliminate losses due to rework No rework means that the loss of materials is eliminated. Therefore, it is necessary to find an excellent construction team to serve for themselves, not to find acquaintances for decoration, and not to look for new decoration companies. Otherwise, the wrong choice may lead to greater economic losses. Money Decoration Decoration Decoration Home Decoration Home Decoration Decoration Company Floor Tiles Home Cabinets Premium Tiles Tiles Floor Tiles
Sectional Door Accessories: motor 220V-380V, control box, spring break device, cable break device , aluminum alloy rope pulley, enhanced shaft bracket, air bag system, duplex enhanced guide wheel bracket.
Detail introduction for above main accessories
1.Motor and controller:
The garage door operator is designed for residential overhead sectional and tilt doors.
The operator memorizes the limit positions and unique braking system that slows the unit down at the end of its travel.
Rolling code remote control with max. 20 pcs hand transmitters.
The operator is equipped with a manual release lever which allows manual operation of the door in case of power failure.
The controller has a security LOCK function which prevents operation of the door from transmitter.
2.spring break device:
Sectional doors are hinged and they bend in the tracks as the door opens and closes. Many of these doors are counterbalanced with extension springs, also designated "stretch springs," and they have seven characteristics. The length is the measurement of all the coils pressed together. This, along with the inside diameter of the coils and wire size - the thickness of the wire from which the springs are made - determine the stretch, the distance the spring is extended - normally half the door height, and pull, the force the spring pulls when stretched its normal length. The type of ends determine how the ends of the spring are mounted. The initial tension is the percentage of pull needed to separate the coils. This is determined by the pitch with which the springs are wound. On sectional garage door springs this is normally 15 percent. For example a 100 pound pull spring requires 15 pounds of weight to separate the coils; when a door is open the two springs will support 15 pounds of door weight without any stretch.
Most extension springs are made of oil tempered wire. These are normally coated or painted. Some springs are made of galvanized wire.
3.able break device:
cable break device ,door hardware
adjustable bottom bracket .
the raw material hot plate
zinc plated
safety device
adjustable bottom bracket
the raw material hot plate
zinc plating
spring safety device ,2" and 3" safety device
once the cable is broken ,this devoice can keep the hurt away from the door falling
4.aluminum alloy rope pulley
Equipment: CNC stamping/punching machine, CNC bending machine, CNC cutting
machine, 5~250 tons punching machines, welding machine, polish machines...
Processed material: stainless steel: copper, carbon steel
Surface treatment: Hot galvanized, polishing
Making process:Stamping, deep drawing,bending, punching, laser cutting,threading,
welding, tapping, riveting, grinding
5.air bag system
It is a safety device. When the door is down to hit something, it will up automatically.
Operation pressure:<3mbar
Battery:CR2032*2
Battery lifetime>1 year
Emission frequency: 315MHZ
Emission power:<10mW
Receiver power source:12V
6.duplex enhanced guide wheel bracket
Determining the right type of sectional door roller for your garage door tracks can be a little confusing, especially when you do not know what you need to look for in a garage door roller. To simplify things, there are two primary things you need to be aware of. First are the actual dimensions of the roller, and second is purpose that you will be using the door for. You can read below about measuring your roller and choosing the right quality of material for your door.
Other Door Accessories,Electronic Door Accessories,Automatic Door Accessories,High Speed Door Radar Detector Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfhighspeeddoor.com