Painter's operating procedures need to pay attention to what safety 1, pay attention to fire prevention. All kinds of paint and other flammable materials should be classified and stored in special warehouses. Warehouses and preparation of paints and other workplaces are strictly prohibited and must be equipped with fire-fighting equipment and tools. Use paint, kerosene, gasoline, acetone, etc. to deploy oil, wear protective equipment, and do not smoke. 2, in the room or container should be painted, should be kept well ventilated, spray painting operations are not allowed around the fire. 3. The paint on the platform, scaffolding, etc. should be wiped at any time to prevent slipping. After the work is completed, the site shall be cleaned, and the remaining paint and solvent shall be sealed and sealed. When burning waste oil drums, keep away from buildings, power sources, and flammable and explosive materials. Contaminated cotton yarn, rags, oil paper and other wastes must be collected, stored, and disposed of in a timely manner. 4. When adjusting, brushing, spraying paint, or using paints containing volatile agents and quick-drying agents indoors, wear necessary protective equipment to prevent poisoning. When spraying the paint, use a protective grease to wipe hands. Do not touch the eyes or skin during operation. After using paint remover or banana water to remove paint or clean items, wash hands with soap. 5, use the torch. Refueling must not be overfilled, pumping should not be excessive, use time should not be too long, and the fire mouth should not be allowed to fire when firing. 6. Must be handled by experienced workers when dealing with waste acids such as waste acid or waste kerosene, gasoline, turpentine, and other inflammables. 7. Paint doors or windows above the two floors above the paint or paint. Wear safety belts or operate on secure scaffolding. The seat belt should be tied in a secure place and it must not be attached to the door or window frame. Hold the barrel firmly and prevent it from falling. 8. The volatile oil wax must be extinguished when the volatile solvent is put into the melt to reduce the temperature of the melting agent so that it does not reach the boiling point. 9, pot paint can not exceed three quarters of the capacity of the pot can not touch the water paint after the end of the pot should be extinguished 10, sandblasting rust, nozzle joints should be solid, not on the person. Nozzle clogging should be stopped to eliminate pressure before repair or replacement. Paint Project Three Trees Paint Paint Window Flanged Carbon Steel Ball Valve Flanged Carbon Steel Ball Valve,Mild Steel Ball Valve,Carbon Steel Flanged Ball Valve,Carbon Steel Socket Weld Ball Valve Zhejiang Chenxiang import and export trade Co., Ltd , https://www.chenxiang-valve.com