[China Aluminum Industry Network] In view of the large number of CTP plates currently on the market, where should we evaluate the CTP plates? What kind of plate meets our printing quality requirements? Non-Wonven Polishing Wheel,Non Woven Steel Polishing Wheel,Buffing Wheel For Drill,Aluminum Polishing Kit Jiangmen Gude Polishing Equipment Co., Ltd , https://www.kokipolishing.com
(1) Reproduction of outlets. The network points are the basis for printing and copying the graphic and text information. The quality of the printing plate outlets will directly affect the quality of the printed Internet sites and thus affect the reproduction of the entire printing process. Therefore, it is important to select a good reproduction medium for the dots.
The network of CTP plates is the same as the traditional PS plate. It is also composed of sand grains. For a CTP plate to achieve 1% to 99% dot reproduction, the grain size of the plate must be small enough, because the finer the sand, the more sand grains will be supported in the high-gloss mesh, and the stronger the dot, the more important the printing will be. The less likely it is to lose the version. However, the grain size of the dots cannot be too fine, and the width of the ink and ink balance of the plate material with fine grain in the printing is small, which is not conducive to the control of the printing quality.
(2) Line reproduction. The reproducibility of the lines for the media usually consists of two aspects, the reproduction of very thin lines and the dimensions of the yin and yang lines. The presence of very thin lines is closely related to the grain size of the plates, especially the uniformity of the grains, because only the edges of the lines supported by the uniformly distributed grains are likely to be smooth. The size of the yin and yang lines is mainly determined by the coating thickness of the plate material. We can compare the changes in the lines by printing the adjacent Yin and Yang lines on the plate.
(3) New ink. The ink affinity of the plate refers to a characteristic of the printing plate graphic part which is selectively inked by the transfer roller. The thickness of the ink on the plate will directly affect the thickness of the ink on the blanket and the paper, and the amount of the ink transferred to the plate. It depends on the level of ink affinity of the printing plate. If the ink-printing part of the printing plate is low in ink receptivity, the range of controlling the ink in the whole printing is smaller, and the more it is unfavorable to the product quality. In addition, the use of poor ink affinity printing plate, the remaining ink will accumulate in the transfer roller, so that the transfer roller ink film is thickened, both ends of the ink accumulation, resulting in ink splash phenomenon, but also reduce the ink cover force. Therefore, it is very important for CTP plates with good ink receptivity.
In order to improve the ink receptivity of the CTP plate, the photosensitive material of the plate graphic portion should have chemical properties that are close to the pigments, resins, and solvents in the ink.
(4) Hydrophilicity. The hydrophilicity of the plate refers to the property of selectively retaining water on the non-graphic portion of the plate. The amount of water in printing can neither be too much nor too little. Too little, the part that is not imprinted is easy to get dirty; too much, it is easy to appear dark and imprinted, the paper is not even, the paper is deformed, the overprint is not allowed and so on. At present, the main substrate of the CTP plate is aluminum, which is hydrophilic, and the surface is ground plated to form a porous surface, which enhances the total surface area and ultimately improves hydrophilicity.
In addition, the factors that affect the performance of the CTP plate are the resolution of the plate, the resistance to printing force, the degree of undertone, the sensitivity, the size and the uniformity of the coating.
In a word, with the continuous progress of CTP plate making technology and the continuous improvement of the CTP plate material performance, the advantages of CTP plate material are continuously highlighted, and the digitized work flow is continuously improving. We have reason to believe that CTP plate material will inevitably have a broader development prospect.