AC asynchronous motor is the leading AC voltage motor, widely used in electric fans, refrigerators, washing machines, air conditioners, hair dryers, vacuum cleaners, range hoods, dishwashers, electric sewing machines, food processing machines and other household appliances and various electric Tools, small electromechanical equipment. The AC asynchronous motor is divided into an induction motor and an AC commutator motor. The induction motor is further divided into a single-phase asynchronous motor, an AC-DC motor and a repeller motor. The speed of the motor (rotor speed) is less than the speed of the rotating magnetic field, so it is called an asynchronous motor. It is basically the same as the induction motor. s = (ns - n) / ns. s is the slip rate, Ns is the magnetic field speed and n is the rotor speed. Fundamental: 1. When the three-phase asynchronous motor is connected to the three-phase AC power supply, the three-phase stator winding flows through the three-phase magnetomotive force generated by the three-phase symmetrical current (stator rotational magnetomotive force) and generates a rotating magnetic field. 2. The rotating magnetic field has a relative cutting motion with the rotor conductor. According to the principle of electromagnetic induction, the rotor conductor generates an induced electromotive force and generates an induced current. 3. According to the law of electromagnetic force, the current-carrying rotor conductor is subjected to electromagnetic force in the magnetic field to form electromagnetic torque, which drives the rotor to rotate. When the motor shaft has a mechanical load, it outputs mechanical energy outward. An asynchronous motor is an AC motor whose ratio of the speed of the load to the frequency of the connected grid is not constant. It also changes with the size of the load. The greater the load torque, the lower the rotor speed. Asynchronous motors include induction motors, doubly-fed induction motors, and AC commutator motors. Induction motors are the most widely used, and in general, induction motors are asynchronous motors without causing misunderstanding or confusion. The stator winding of a common asynchronous motor is connected to the AC grid, and the rotor winding does not need to be connected to other power sources. Therefore, it has the advantages of simple structure, convenient manufacture, use and maintenance, reliable operation, low quality and low cost. Asynchronous motors have higher operating efficiency and better working characteristics, and they are close to constant speed operation from no-load to full-load range, which can meet the transmission requirements of most industrial and agricultural production machinery. Asynchronous motors are also easy to generate various protection patterns to suit different environmental conditions. When the asynchronous motor is running, the reactive power must be drawn from the grid to make the power factor of the grid deteriorate. Therefore, synchronous motors are often used for driving high-power, low-speed mechanical equipment such as ball mills and compressors. Since the speed of the asynchronous motor has a certain difference in rotational speed with the rotating magnetic field, the speed regulation performance is poor (except for the AC commutator motor). It is economical and convenient to use DC motors for transportation machinery, rolling mills, large machine tools, printing and dyeing and papermaking machinery that require a wide and smooth speed range. However, with the development of high-power electronic devices and AC speed control systems, the speed control performance and economy of asynchronous motors currently suitable for wide speed regulation are comparable to those of DC motors. Pre-applied Waterproofing Membrane
SRD HDPE Pre-applied Waterproofing Membrane has three layers. HDPE is the main waterproof layer, and there is one protective layer (for an environmental change), and one isolated layer. It has a self-adhesive overlap edge on the long side. SRD HDPE waterproof membrane is suitable for most below-ground structure projects.
After moisture curing reaction between cement slurry and high polymer, the membrane and the structural layer will be firmly bonded, which will improve the reliability of the waterproof layer.
It can withstand the working load and the attack of the reinforcement cage, and doesn't need special protections.
It can withstand the working load and the attack of the reinforcement cage, and doesn't need special protections.
SRD HDPE Membrane has great resistibility towards the alkali water from the concrete, home scrap will not affect it.
Doesn't need oil or heat to dry the wet substrate, with no volatile substance.
Below Ground Structure Waterproofing Sheets,Waterproofing Board,Waterproof Boards For Outside,Underground Waterproofing Board Suzhou Smart Building New Materials Co., Ltd. , https://www.srdwaterproofing.com