First, the measurement problem; 1. It is best to measure the length twice, from left to right and from right to left, so as not to look at the wrong size for the first time. 2. When measuring the height of the ceiling, it is necessary to measure the quasi-high points in several different directions, and at the same time, there are no beams under the gusset plate. 3. When measuring, it is necessary to look at the height of the bottom of the motorized socket to the floor tile, and at the same time, it is necessary to look at the height of the window (more attention should be paid when retesting). 4. When measuring, measure the distance and height of the gas meter and the pipeline from the wall, the height of the flue, the height of the inlet and outlet, the distance from the drainage supervisor to the wall, the height of the socket (retest), and so on. 5. When measuring, it is necessary to see whether there are steps on the ground, whether there are concave and convex beams on the wall, and when pulling the cabinet by the window, the pulling of the screen should be considered. If the cabinet is concerned, the relevant dimensions should be measured. 6. When the retest is done, the floor tiles should be paved and the wall tiles should be affixed. If the wall cabinet or the high cabinet is to the top, the roof should be hanged to retest. 7. When measuring the special shape or polygon, it is best to choose the fixed point and the diagonal of the quantity. When the two sides are made of the wall (the floor and the hanging cabinet), the inner and outer distances should be measured. 8. When there are poor bricks, it is necessary to measure the distance and height of the wall (including the height of the bottom and the top to the ground). The normal refrigerator position is preferably 700MM long, and the special additional length is reserved. 9. The thickness of the door cover should be measured and the thickness of the door cover (including the line), or the floor with the sliding door, the hanging cabinet should open the sliding door and leave a gap of 10-20MM. 10. When measuring the kitchen of the unit, pay attention to whether the wall is a stone wall or not, so that the wall cabinet cannot be installed. Second, the design map problem; 1, round and shaped cabinets are best not to design, try to avoid. 2. The net size of the side panels of the chamfering cabinet or the shallow cabinet shall not be less than 60MM, so as not to affect the installation of the hinge base. 3, European style hood is best not to design the cabinet and shelf, the Chinese hood on the ceiling cabinet is best designed to open the door, to avoid opening the door, the height of the door panel should be extended more than 50MM, the bottom plate is changed to the front and rear stalls. 4, the water heater is best not to design the hanging cabinet, reserve vacancies, such as to do the bottom, the top plate opening or bottom, the top plate is changed to the front and rear stalls. 5, washing machine and dishwasher inlet and outlet water and power outlets, preferably [2] in the next floor cabinet. 6. The power socket of the disinfection cabinet and the oven is designed at the back, but the height of the power socket of the oven should exceed 600MM, or the cabinet of the oven should be located in the cabinet next to it. The depth of the oven cabinet should not be less than 580MM. 7, the built-in refrigerator and built-in microwave power outlet, designed in the back, pay attention to the depth of the cabinet (guaranteed at 580MM deep), the bottom of the cabinet, the top plate should be opened, to maintain convection ventilation. 8. The false door strip should be designed on the side of the wall or the side of the door cover to avoid affecting the drawer and the upper door. 9, the bathroom hanging on the wall of the cabinet, the design drawings should indicate the strength of the backboard reinforcement. 10, the height of the hanging cabinet light source is about 1700MM, set the switch on the countertop, the socket of the European-style hood is at least 2250MM (without floor tiles). 11, the basin of the bathroom, the best drainage wall. Third, the contract issue; 1. The style of the wooden frame glass door, the handle of the aluminum frame door and the silencer pad, especially when the door panel is the built-in handle, the aluminum frame door handle should be selected again. 2, the door panel should be clearly written; model, color, horizontal and vertical lines, knife type (molded door), edge code color, double-sided polishing (paint and glass), color also indicate, special color should also write the same That set of samples. 3, artificial stone countertops should be clearly written; code, color, front mouth type, rear file type, lower hanging height, under the table, middle, upper basin, basin requirements (front, back, left, right), side Add rear gear, built-in handle front lower mouth, bar table pad (sub-upper), side down (inside and outside) and so on. 4, the handle should be written clearly; horizontal and vertical loading method, opening direction. 5, the cabinet board should be clearly written; model, color, horizontal and vertical lines, side seeing the surface, tube board, microwave cabinet requirements and so on. 6, the glass door should be written clearly; code, name, wooden frame or aluminum frame. 7, special requirements should be clearly written; such as processing surplus materials (preferably provide size), complex chamfer cabinets, beyond the factory process requirements, and so on. Surface Mounted Pool Led Lights,Ss304 Housing Led Lights,Underwater Spa Led Light,Swimming Pool Led Lamps Guangzhou Qshine Pool Lights Manufacture Co., Ltd , https://www.gdqshinepoollight.com