Fiberglass Mesh
SANXING WIRE MESH FACTORY provide first-class fiberglass screening and excellent services for worldwide customers. We can also develop different fiberglass screening products like sunshade, portiere and so on. Fiberglass screen, or fiberglass screening, fiberglass insect screen, glass fiber screen, is made of glass fiber by the means of filament plastic-coating process. Fiberglass screen is plain weaving, and high temperature-fixing.
Jinan Ruihai Hydraulic Machinery Co., Ltd. is one of the domestic manufacturers specializing in the production of hydraulic lifts, hydraulic lifting platforms, lifting freight elevators, hydraulic lifting platforms and aluminum alloy lifts. It is a member of China Lifting and Transportation Warehousing and Logistics Association and a contract-honoring and trustworthy unit.
Jinan Ruihai Hydraulic Machinery Co., Ltd. summarized the faults and causes of the aerial work platform based on years of research and development experience, and hopes to help everyone.
First, the phenomenon of aerial work platform failure
1. The new hydraulic oil after replacement will deteriorate after use.
2. The automatic transmission temperature is too high and smokes from the fuel filler.
Second, the cause of the failure of the aerial work platform
1. The hydraulic oil radiator pipe is blocked.
2, the car is not used properly, often overloaded, such as often used in trailers, or often fast, speeding and so on.
3. The pressure limiting valve leading to the hydraulic oil radiator is stuck.
4. The main oil circuit oil pressure is too low, and the clutch or brake slips during work.
5, clutch or brake free clearance is too small
Third, the high-altitude operation platform fault diagnosis and elimination
Let the car run at low and medium speeds. After the automatic transmission reaches the normal operating temperature, check the temperature of the automatic transmission hydraulic oil radiator during engine operation.
Under normal conditions, the temperature of the hydraulic oil radiator can reach about 60 °C. If the temperature of the hydraulic oil radiator is low, the oil pipe is clogged, or the pressure limiting valve to the hydraulic oil radiator is stuck. In this way, the hydraulic oil is cooled in time, and the oil temperature is too high, resulting in deterioration.
If the temperature of the hydraulic oil radiator is too high, the free clearance of the clutch or brake is too high. The automatic transmission should be disassembled and adjusted.
If the throttle cable or throttle position sensor is installed properly, the automatic transmission should be disassembled to check whether the oil pump is worn out too much, whether the main oil pressure regulating valve and the throttle valve in the valve plate are stuck, and whether the main oil circuit has oil leakage. .
If the hydraulic oil temperature is normal, the main oil pressure should be measured. If the oil pressure is too low, check the adjustment of the elevator throttle cable or the throttle position sensor.
If the above checks are normal, the fault may be caused by the car often overloading, or the hydraulic oil of the appropriate grade is not used as required. In this regard, the hydraulic oil can be completely discharged, and the hydraulic oil of the specified grade and quantity can be added.
Each component of the elevators and lifting platforms produced by the company is selected from domestic excellent enterprises, and imported parts can also be used according to customer requirements. Only by continuously improving the quality of products can we meet the requirements of our customers and the company can develop. (http://)
Fiberglass Mesh,Fiberglass Mesh 4X4,Fiberglass Mesh 5X5,Alkali Free Fiberglass Mesh
Anping Sanxing Wire Mesh Factory , https://www.anpingsanxingwiremesh.com