With the continuous development of science and technology, users' requirements for bathroom equipment experience are constantly improving, and smart toilets are becoming more and more popular. It incorporates cutting-edge technology to provide users with a more convenient and luxurious bathroom experience. Smart Toilet, Automatic Toilet, Intelligent Toilet, Electronic Toilet, Bidet Toilet Guangdong Fabia Intelligent Technology Co., Ltd , https://www.smartfabia.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>Detection of cooperation between NSK bearing and shaft Testing of cooperation between NSK bearings and shafts
The cooperation gap between the NSK bearing and the shaft must be suitable; in order to make the service life of the NSK bearing more durable; during the detection of the radial clearance of the NSK bearing, the following methods can be used: /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
First, the ruler detection method is about the NSK bearing with larger diameter; the gap is larger; it is intended to be directly detected with a narrower feeler gauge. For the NSK bearing with smaller diameter; the gap is smaller. The side of the NSK bearing is damaged. Gap; must be measured with a suitable thickness gauge.
Second, the pressure lead detection method using the pressure lead method to detect NSK bearing voids is more accurate than the feeler detection; but the cost is relatively high. The aluminum wire used for testing should be soft; the diameter is moderate; not too big or too. Noisy this paragraph 湎Pocket 1. 5~2 times; in practice, soft lead wire is usually used for testing.
The time of detection; first open the NSK bearing cover; select the appropriate diameter of the lead wire; cut it into 15~40 mm long section; place it on the journal and the upper and lower NSK bearing interface; cover the NSK bearing cover; Tighten the fixing bolts; then loosen the bolts; remove the NSK bearing cap; use a micrometer to check the thickness of the flattened wire; and find the average value of the NSK bearing top clearance.
If the headspace is too. Slightly thin (11) 峦呓岷 嫔 嫔 . .. If too large; then reduce the pad, scrape the ground or cast the tile from the head.
Adjustment of bearing bushing force: In order to avoid possible transition and axial movement of the bearing bush during operation; in addition to cooperating with interference and stop parts; bearing bush must also be pressed with NSK bearing cap; measuring method and measuring top gap method The same; the thickness of the soft lead wire is measured; the bearing bushing force can be calculated.
Usually, the bearing force of the bearing bush is between 0. 02 and 0. 04 mm. If the pressing force does not meet the specifications, it can be adjusted by increasing or decreasing the thickness of the gasket at the joint surface of the NSK bearing and the bearing housing; the back of the tile is not allowed to be padded.
In addition to ensuring radial clearance, the plain bearings should also ensure axial clearance. When detecting axial clearances; move the shaft to a pole orientation; then use a feeler gauge or dial gauge to measure the orientation of the shaft from one pole to the other. The amount of turbulence is the axial clearance. When the clearance of the sliding bearing does not conform to the rules; adjustment should be made. The split NSK bearing often uses a gasket to adjust the radial clearance.
Recommend to friends comments close window Bearing related knowledge The slewing bearing device needs to grasp the six major methods of the use of magnetic bearing bearing fatigue life
NSK high-precision angular touch ball bearing specification series layout composition how to serve the bearing
This article links to http://
Please indicate the bearing network http://
Previous:The front and rear code of German FAG bearing (1)
Next: The warehouse of rolling bearings
Auto-flush: Intelligent toilets are often equipped with sensors that automatically flush when you leave the seat. This hands-free operation adds convenience and helps maintain cleanliness and hygiene.
Seat heating: A cold toilet seat can be uncomfortable, especially during the colder months. Smart toilets usually have a built-in seat heating function, which can adjust the temperature according to preferences, providing a warm and comfortable seating experience.
Adjustable water temperature and pressure: Smart toilets can often set the water temperature and pressure for bidet cleaning to suit your comfort and personal preferences.
Bidet Cleaning: Bidet toilets often include a bidet feature that sprays water for personal cleansing after using the toilet. This feature eliminates the need for toilet paper and provides a more hygienic and refreshing cleaning experience.
Odor-removing features: Some smart toilets come with built-in deodorizers that help eliminate unpleasant odors. These deodorizers typically use carbon filters or other technologies to neutralize and remove odors from the toilet area.
Additional features: Depending on the model, smart toilets may have additional features such as air dryers, night lights, self-cleaning features, touchless controls, built-in music speakers, Bluetooth connectivity, and even integrated health monitoring.
Stylish design: Smart toilets are designed with an eye toward aesthetics, often featuring sleek, modern designs that complement a variety of bathroom styles. The clean lines and streamlined appearance create an overall sense of modernity and luxury.
Smart toilets offer a range of benefits including enhanced hygiene, convenience and increased comfort. While they tend to be more expensive than traditional toilets, many people find the advanced features and improved user experience well worth the investment.
Source: China Bearing Network Time: 2014-03-29