Core Tip: Stainless steel knife-shaped gate valve adopts knife-type gate plate, which has good shearing effect. It is most suitable for difficult fluids such as slurry, powder, fiber and fiber. It is widely used in papermaking, petrochemical, mining, drainage, food. Hardware equipment in other industries. So what do you need to pay attention to when using stainless steel knife gate valves? Stainless steel knife-shaped gate valve adopts knife-type gate plate, which has good shearing effect. It is most suitable for fluids such as slurry, powder, fiber and other difficult to control. It is widely used in papermaking, petrochemical, mining, drainage, food and other industries. Hardware equipment. With a variety of valve seats to choose from, and with electric or pneumatic actuators for on-site control needs, the valve can be automated. The wide application of stainless steel knife-shaped gate valve is due to its own characteristics. First of all, its sealing effect is good, U-shaped gasket has good elasticity; secondly, its full-diameter design has strong passing ability; again, its brake-off effect Good, can effectively solve the leakage phenomenon after the blockage of the block, particle and fiber medium; finally, because of its convenient maintenance, the valve seal can be replaced without removing the valve. The opening and closing member of the imported stainless steel knife-shaped gate valve is a gate. The direction of movement of the gate is perpendicular to the direction of the fluid. The inlet knife-shaped gate valve can only be fully open and fully closed, and cannot be adjusted and throttled. [When using stainless steel knife type gate valve, it should be noted that the gate has two sealing faces. The two common sealing surfaces of the most common mode gate valve form a wedge shape. The wedge angle varies with the valve parameters, usually 50, wedge type The gate of the gate valve can be made into a whole, called a rigid ram; it can also be made into a ram that can produce a small amount of deformation to improve its processability and compensate for the deviation of the sealing surface angle during processing. This ram is called Flexible brake. When the stainless steel knife gate valve is closed, the sealing surface can be sealed only by the medium pressure, that is, the sealing surface of the shutter is pressed against the valve seat on the other side by the medium pressure to ensure the sealing of the sealing surface, which is self-sealing. Most knife-type gate valves use forced sealing, that is, when the valve is closed, the external force is forced to press the gate to the valve seat to ensure the sealing of the sealing surface. Concerned about surprises Label: What should you watch out for when using a stainless steel knife gate valve? Previous: Introduction to the mechanical structure of the ball mill Next: Introduction of the new drive unit - electric drum Galvanized iron wire is designed to prevent rusting and shiny silver in color. It is solid,durable and extremely versatile, it is widely used by landscapers, craft makers, building and constructions,ribbon manufacturers, jewelers and contractors.Its aversion to rust makes it extremely useful around the shipyard,in the backyard, etc. Electro Galvanized Wire,Electro Galvanized Steel Wire,Electro Galvanized Iron Wire,High Tensile Strength Galvanized Wire Shenzhou City Hongda Hardware Products Co.,Ltd , https://www.galvanziedwire.com