If the thrust pad wears and the motor swing are small, the thrust tile and the anti-heavy bolt, the thrust head mirror plate bolt and the insulating pad can be kept unchanged, and the proper treatment can greatly reduce the workload of maintenance and ensure the quality of maintenance. . However, if the thrust tile wears a lot, it must be ground. After grinding, the motor should be adjusted according to the level before the inspection. If the deviation of the motor swing is too large, the swing of the motor should be adjusted, but the direction of the swing should be Before adjustment, the adjustment value should be close to the adjustment. Other key data should be compared before and after disassembly and assembly. The original measurement data should also be used for adjustment. However, the gap of the upper guide bush should be determined according to the actual swing of the upper guide. Since the motor lower guide of the unit is a roller bearing, the machining accuracy of the shaft socket is high, and the position of the shaft is easy to determine. For the lower guide bush of the motor, the machining surface and the thrust head journal of the upper and lower cylinders can be used. The distance between the motor shaft journal and the gap between the upper and lower guide bushes are used as the reference, and the position of the shaft is determined after comprehensive analysis. Stainless Steel 3.00ml/rev (72specs) Gear Pump Stainless Steel 3.00ml/rev (72specs) Gear Pump,Stainless Steel Micro Gear Metering Pumps,Stainless Steel Oil Gear Pump,Stainless Steel Brushless Gear Pump,Stainless Steel Magnetic Pump Suzhou Macxi Fluid Technology Co.,Ltd. , https://www.macxipump.com