Panel furniture generally needs to be processed into a white blank through a mechanical process, and then the surface is made by a paint process. However, the quality requirements in the process of the panel furniture mechanism are also very important, and the quality directly determines the quality of the blank of the panel furniture, which in turn affects the later stage. What are the quality requirements of the surface painting process and the quality requirements of the panel furniture mechanism?

The quality requirements of the panel furniture mechanism are mainly:

1. Process requirements for paper pressing: After processing the plate, the paper must be firm and smooth, and it is not allowed to degumming, separating, bubbles, scratches, wrinkles, rotten paper, indentations and other sundries.

2, the quality requirements of the press:

1) The gluing of the plate should be firm and no degumming is allowed. When the plate is auxiliary, it must be aligned with the adjacent sides of the skeleton. The position deviation of the upper and lower plates after cold pressing is less than 1.5cm.

2) After cold pressing, the surface of the component should be clean and flat. It is not allowed to have obvious skeleton marks, bending deformation, scratches and excess glue.

3), the curved core strip should be tight, the surface is flat, and the transition is natural without glue pollution.

3, the quality requirements of the milling machine:

1) The mold must be made accurately, the shape size after processing is consistent with the drawing, and the tolerance of the non-joined position is ±1.5mm.

2) The processing surface must be smooth, the lines are smooth, the transition is natural, the surface of the parts after processing is smooth, no cracking, scratches, etc., the surface of the parts is clean, no debris, no wood chips.

Global hardware network

Concerned about surprises

Label: What are the quality requirements for the panel furniture mechanism?

Previous: Several installation methods of decorative glass mirror Next: Application and precautions of voltage regulator

Top-mount Sinks

Drop-in kitchen sinks, also called self-rimming sinks, overmount sinks, or top-mount sinks, are sink basins that install and sit on top of your kitchen counter. There is a visible rim or lip on the perimeter of the basin that rests just over the cut-out for the sink. Drop-in sinks are supported by this lip and a series of hidden clips that attach to the underside of the countertop.

The Advantages of Drop-In Sinks

Drop-in sinks have some clear advantages over other styles, especially in the kitchen.

Cost

They`re generally cheaper to buy and easier to install than undermount sinks. In fact, even weekend warriors and DIY newbies should have no problem installing a basic overmount sink. If cost is a consideration in your kitchen, an overmount sink with a do-it-yourself install is a great way to stay within budget.

Cleaning

While cleaning may not be your foremost concern when choosing a kitchen sink, it should be considered. After all, you`ll have to care for and maintain your sink regularly. The basin of an overmount sink is easier to clean than the basin of an Undermount Sink.

Protection

If you`ve got soft countertops, drop-in sinks can help protect the edges of the sink cutout.

  • Marble and some specialty counter finishes benefit from the added protection provided by the lip of a drop-in kitchen sink basin. It prevents the build up of water on the surface edges of the stone through repeated exposure of use.
  • If you have laminate countertops, drop-in sinks are the only option: the particle board below the laminate surface isn`t strong enough to support undermount sinks but plays well with self-rimming basin types.

Top-Mount Sinks,Top Mount Kitchen Sink,Top Mount Stainless Steel Sink,Black Top Mount Sink

Guangdong Huayou Hardware Products Co.,Ltd , https://www.gdhuayouhardware.com

Posted on