In the modern decoration, ceramic tiles are widely used decorative building materials and are favored by people because of their beautiful appearance. In many people's impressions, tiles are cemented, so when you think about tiles, you think of cement, and even think of some cement marks after tiles fall off. In fact, it is possible to install tiles without using cement. Tile adhesive is a very good substitute for cement. Tiles have a strong adhesive strength and can not only adhere to ceramic tiles but also can be used for the installation of plasterboards and fiberboards. It is an application. Very extensive building materials. Today Xiao Bian took everyone with you to find out about the information about tile adhesives.

Tile adhesive profile

Tile adhesives, also known as tile adhesives or adhesives, viscose mud and other various names, are new materials for modern decoration, replacing the traditional cement yellow sand, the adhesive force is several times that of cement mortar can effectively paste large Tile stone, to avoid the risk of falling bricks. Good flexibility to prevent empty production. Mainly used for pasting tiles, tiles, floor tiles and other decorative materials, widely used in interior and exterior walls, floors, bathrooms, kitchens and other architectural decoration decorative places. Its main features are high bonding strength, water resistance, freeze-thaw resistance, good aging resistance and easy construction. It is a very ideal bonding material.

The advantages of tile adhesive

Relative to cement, tile adhesive has many advantages, such as the use of tile adhesive can save more space than cement, tile adhesive as long as a thin layer can be, and cement is relatively thick; tile adhesive force is strong, if construction When the process is up to standard, the tiles are very firm; they can also reduce waste, no toxic additives, and comply with environmental requirements.

Classification of tile adhesive

1. Ordinary tile adhesive: It is suitable for paste of various kinds of floor tiles or wall tiles of ordinary mortar surface;

2, strong tile adhesive: with strong adhesion and resistance to drop performance, suitable for the adhesive force of a larger wall tiles, non-sand mortar surface, such as wood plate surface or the old decorative paste;

3, adhesive tile adhesive: adhesive force, more flexible and tough, able to resist the adhesive layer of thermal expansion and contraction of the stress generated by the application of tiles on plasterboard, fiberboard, plywood or old finishes (tiles, mosaics, Terrazzo) Etc. and paste of various sizes of various stone plates. In addition to gray tiles, tile adhesives can also provide a white appearance, suitable for light or translucent marble, tile and other natural stone.

How to use tile adhesive

1, first clean the back of the pre-selected tiles, and check the paste base surface. The base surface should be firm, smooth, clean, free of pollution, loose material, empty drums, etc. There are curing agents, mold release agents, and smooth concrete surfaces that need to be roughened and polished. If the base surface is not firm and uneven, please use cement mortar to repair it.

2. Pour the required fresh water into the "mixing barrel" tile glue Mixing ratio: 20kg tile adhesive + (4-5) kg water

3, brick powder slowly poured into the "mixing barrel". Tile adhesive mixing ratio: 20kg tile adhesive + (4-5) water

4. After the water and tile glue are poured in, use the “electric stirrer” to stir until it is uniform, no granules, no precipitate, paste, let stand for a few minutes and then stir slightly to start the following tiling.

5. When using a professional “tooth scraper”, scrape the adhesive evenly on the work surface, scraping about 1 square construction surface each time.

6, "tooth scraper" will be evenly wipe the glue on the base surface and the back of the tile after the tiling operation.

7. When rubbing the tile with your hand, press the tile on the base surface, or use the glue hammer to adjust the parallelism of the tile.

8, to ensure the parallelism of the tile It is recommended to use a cross bar for the level and tiling.

9, after the completion of the process to be cleaned, cemented tiles finished construction is completed, waiting for filling after 24 hours.

Tile adhesive construction considerations

Before the tile construction, the vertical and flatness of the substrate must be confirmed. If it is not smooth, it needs to be treated. The tile adhesive that has already dried is forbidden to be used in water; when laying tiles, it is necessary to keep the expansion joints in order to avoid Due to temperature differences, thermal expansion and contraction occur, resulting in floor squaring. Tiles are used to tile the tiles and can be caulked after 24 hours. Tile adhesive construction is best used in an environment between 5 and 40 degrees. operating.

Xiaobian conclusion: The relevant knowledge about tile adhesive is introduced here, and I hope to help everyone. If you want to know more related information, you can pay attention to this website information.



Tile adhesive tile adhesive brand

Aluminium Profiles for Sliding Door

Features of aluminum frame decoration:

1. Wide application range: applicable to machine frame, support, door, industrial automation equipment, factory and office workbench, shelf, container, ladder, aluminium door frame etc.

2. Convenient construction: it is modular and multifunctional, and can quickly frame the ideal mechanical equipment without complex design and processing.

3. Beautiful and practical appearance: light weight and high stiffness, simple and beautiful appearance without paint.

4. Strong expandability: unique T-shape and groove design. When installing components, nuts and bolts can be installed at any position without dismantling profiles. The refitting equipment is simple and fast.

Purpose of frame decorative aluminum:

1. Mechanical frame structure and connection of various parts;

2. Workbench, industrial assembly line and conveyor belt;

3. Small automatic equipment and non-standard electromechanical equipment;

4. Industrial inspection and detection and safety protection system;

5. Electronic and auto parts assembly line;

6. Chemical, pharmaceutical, medical, food cleaning and other equipment;

7. Commercial exhibition, outdoor advertising and stage setting,hanging door frame,aluminium glass door,hanging door rail,hanging door track, aluminium patio doors;

8. Industrial fence, protective cover and various frames;


Aluminium Profiles For Sliding Door,Aluminum French Doors,Aluminium Sliding Door Frame,Aluminum Sliding Glass Doors

GuangDong XinCheng Material CO.,LTD , https://www.xin-alu.com

Posted on