LED Underground Lamp is a new type of buried decoration lamp with high brightness LED as the light source and LED constant current drive as the driving mode.Widely used in square, park, leisure places, such as outdoor lighting, outdoor as well as park, square, garden greening, lawn, flower beds, pedestrian street, waterfalls, fountains, water etc illumination, add luster for life.
Product size
Technical parameters
Main material
High - pressure cast aluminum, 92% high - light steel screen printing glass
The light colored temperature
Red/Green/Yellow/Amber/Vermilion/Acid blue/3000K/4000K/5000K/6000K
Surface treatment
UV Polyester powder coating
Light distribution device
Reflector lamp cup series:6°
Optical lens series:8°/15°/25°/45°/10×30°/10×60°/20×40°
The light body color
Dark grey
Working voltage
DC24V
Safeguard procedures
Silica gel ring compacted waterproof
way to install
Embedded part
Average lifetime
350mA20000hours,500mA15000hours
rated power
/
Control mode
/
Level of protection
IP65
operating ambient temperature
-25℃~50℃
Working environment humidity
10%~90%
Led Underground Lamp ,Led Underground Headlamp,Led Cap Lamp Underground Mining,Underground Led Cap Lamps Jiangsu chengxu Electric Group Co., Ltd , https://www.chengxulightings.com
In 2006, the total value of machine tool production and service in the German machine tool industry reached 10.8 billion euros, an increase of 4%. In terms of exports, as of 2006, the German machine tool manufacturing industry has achieved good results for four consecutive years. In the first nine months of 2006, the export growth rate was as high as 13%. Demand from the Chinese market surpassed the US market and once again became the largest overseas market for German machine tool exports. At the same time, Germany's exports of machine tools to South Korea and India also performed well. This marks the prosperity of the Asian market and the improvement of industrial standards in various industries. Japanese users are also increasing their orders for German machine tools and technology. In 2006, Japan jumped to one of Germany's top 15 export markets for the first time.
In terms of imports, Asian machine tool manufacturers are constantly upgrading their technical standards and strengthening their position in the German market. In the first three quarters of 2006, Germany's machine tool import growth rate was as high as 15%, mainly from China, South Korea, Taiwan and Japan. In 2007, the country's total machine tool production and service value will continue to climb, reaching 11.5 billion euros. As a result, the German machine tool manufacturing industry will achieve the best results in history, and is expected to break the industry's highest record set in 2001.
Japan: long-flowing recovery of fine water
As of the end of 2006, the Japanese machine tool industry has recorded more than 100 billion yen per month for 32 consecutive months, exceeding the record of more than 100 billion yen for 22 consecutive months in the last 90 years of the last century. Other statistics are: In 2006, the total value of machine tool industry production reached 1,21 billion yen, which basically showed the same development trend as the order amount. The export value was 925.5 billion yen, a year-on-year increase of 14%, and the import volume was 135.6 billion yen. It increased by 26% year-on-year. Looking back at the order of the machine tool industry in this recovery period in 2002, it was 655.8 billion yen in 2002, up 14.3% year-on-year; in 2003, it was 851.1 billion yen, up 25.9% year-on-year; in 2004 it was 1 trillion 2362. 100 million yen, a year-on-year increase of 45.2%; 2005 was 1 trillion 363.2 billion yen, an increase of 10.3%; 2006 orders far exceeded the original forecast of 1 trillion 120 billion yen, reaching 1,143 billion yen Yuan, a 54% year-on-year increase, has created a record high in 16 years and continues the recovery of the long-term flow.
South Korea: good exports and shrinking domestic demand
In 2006, the total output value of the Korean machine tool industry reached US$4.14 billion, an increase of 18% from the previous year. According to the stage, it can be divided into: good in the first half of the year and stagnation in the second half of the year, which is characterized by good exports and shrinking domestic demand. According to the demand pattern of different industries, the demand for the foundry mold industry, which is mainly for small and medium-sized enterprises, has shown a comprehensive shrinkage due to the sluggish domestic demand, and the electrical and electronics industry has not been able to add a large amount of investment, which is less than the previous year. However, for the shipbuilding industry with outstanding performance, the demand is very active, and the demand for large machinery has greatly increased. Although the automobile industry has shrunk somewhat due to the strike of Hyundai Motor Co., it has passed overseas expansion of automakers and GM Daewoo. Renault's Samsung investment has relatively expanded, basically maintaining the level of the previous year. 
Germany: a record high