When viewed from indoors privacy film doesn't look dark. From the street, film looks very similar to bare glass. Apply the Projection Smart Film in a dust-free, well-lit, shaded place. Apply the tint when the air temperature is between 40 and 98 degrees Fahrenheit (4.4 and 36.7 degrees Celsius). Be careful not to crease the Projection Film. Wet your fingertips to avoid getting fingerprints on the Magic Film. Partition Wall Smart Glass,Partition Electronic Glass,Slider Door Smart Film,Smart Control Privacy Glass,Privacy Space Glass Door,Building Wall Smart Glass Tianqixun Technology , https://www.tqxdisplay.com
Intelligent atomized glass is used as doors and Windows: it can be used by remote control or automatic control to determine whether the doors and Windows are transparent. When the sun is fierce, atomization can be controlled to make the light soft. The whole room area is comfortable and beautiful, without losing the effect of light transmission, and the position of the curtain can be removed. Intelligent atomized glass can be used as a projection curtain wall: in transparent state, it can display the decorative picture of the background, or as the glass wall of the conference room. In opaque state, it can replace the curtain. There is no need to install the curtain device on the glass wall.
The electromagnetic flowmeter itself only serves as a flow meter. However, many people say that it is possible to control and regulate traffic. This is actually possible.
Its practical electromagnetic flowmeter to achieve automatic control of the flow of the pipeline is also possible. For example, metal tube rotameters, vortex flowmeters, electromagnetic flowmeters, etc., these flow meters can output current signals of 4-20mA. In the flow regulation and control system, the main role of the flowmeter is to convert the measured flow. The current signal is transmitted to the control system, and the valve is opened and closed by the control system to achieve flow regulation and control.
Of course, to achieve flow regulation control, flowmeters alone are not enough, there must be three kinds of equipment on site: intelligent flow meters, flow control systems, regulating valves or valves. If there is no control system and valve at the site, then it needs to be equipped with flow quantitative control device and electric control valve to meet the requirements. The flowmeter is used as a measuring mechanism to measure the flow rate at the site, and converts the flow into a 4-20mA signal. The signal is sent to the control system. The required flow setting at the site needs to be set in the control system when the flow reaches the set value. At that time, the control system sends the signal to the regulating valve. The regulating valve opens or closes the valve. The whole system works like this.