Tiles are one of the most used materials in decoration, and after the tiles are laid, there is a certain gap between each tile, and many families will choose to make beautiful tiles in order to avoid dust accumulation in the tiles. So the United States and tile joints are good, the United States and ceramic tile joints how to do it? Take a look at the following content!
Tile beautiful seam is good
1. Advantages
1. After the ceramic tile is beautifully stitched, the entire surface of the ceramic tile looks very clean and smooth, and there will be no depressions. The main thing is that no dirt will accumulate in the gaps to avoid bacteria. From a cleaning point of view, the surface of the ceramic tile can be cleaned with just a light wipe with a rag, which also reduces people's cleaning burden.
2. The ceramic tile with perfect seam also has the advantages of waterproof and impermeability, which is very beneficial for the family.
3. The decorative effect of the beautiful sewing agent is obvious to everyone. It is made of mixed high-grade pigments. It has rich colors and fine texture, and can be matched with tiles of different colors. The decorative effect is very good.
2. Disadvantages
1. The construction process of the US sewing agent is relatively simple, but after construction, you will find it difficult to make the surface smooth, the surface is bumpy to the touch, and it is more troublesome to remove the traces.
2. Secondly, the wear resistance of the beautiful sewing agent is not very good. If the ceramic tiles such as microcrystalline stone and polished glazed tiles, the perfect seam will make the feet feel uncomfortable.
3. The adhesion of many beautifying agents is insufficient. If the tiles are unevenly laid, thermal expansion and contraction will cause the beautifying agents to crack and fall off. The beauty sealant is also not water resistant. If it is used in the bathroom and kitchen, it will age quickly and need to be refurbished.
How to make beautiful tiles
1. Before the construction, you need to prepare tools such as beauty sewing agent, silicone gun, blank holder, utility knife, and brush.
2. Then clean the gaps of the tiles, and then scoop out the tiles with a 2mm deep groove with the help of the beautiful seam cone to facilitate the penetration of the beautiful seam agent, so as not to fall off because the amount of the beautiful seam is too small.
3. Unscrew the mouth of the US sewing agent, install it on the glue gun, install the glue nozzle, and properly handle a side cut with a utility knife according to the size of the seam.
4. During the treatment of the beautifying agent, different beautifying agents can be selected according to different needs, and the color can also be selected.
5. It is better to use masking paper for the construction of the beautifying agent. If the masking paper is not applied during the construction, it is more difficult to deal with the residual material on the ceramic tiles. Especially after it is dry, it is easy to scratch the tiles with a spatula and affect the appearance.
6. Finally, after all the sewing agent is done, you can use a spatula to remove a small amount of residual sewing agent, then the sewing agent is completed.
The above is the relevant information about whether the ceramic tile beautiful seam is good , how to do the ceramic tile beautiful seam, I hope to help everyone! As for the beautiful seams of tiles? In general, the advantages and disadvantages are all, I think it depends on personal preference and actual situation.
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
Tile beautiful seam is good
Embedded Adjustable Angle Spotlight
Embedded Spotlight,Led Downlight,Embedded Adjustable Light,Ceiling Light Embedded
FOSHAN CITY KURUI LIGHTING CO.,LTD , https://www.kuruilighting.com