Problems of Attention in Low-voltage Charging and Overhauling Work

1) Low-voltage electrification should be monitored by special personnel. Use tools with insulated handles. Work on dry insulation and wear gloves and a safety helmet . Long-sleeve clothing must be worn. It is strictly forbidden to use tools such as crushers, metal rulers, and metal brushes or frizzles.

2) The high and low voltage wires shall be erected on the same rod. When working on the low voltage band wires, the distance from the high voltage wire shall be checked first to take measures to prevent accidental collision with the high voltage parts.

3) Workers shall not pass through when low-voltage live conductors are not insulated. When working on a live low-voltage power distribution unit, isolation measures shall be taken to prevent phase-to-phase short circuits and single-phase grounding.

4) Before separating the rod, clear the phase and neutral line, and select the working position. When disconnecting the wire, disconnect the phase wire first and then disconnect the neutral wire. When overlapping wires, the order should be reversed. Generally, no load wiring or disconnection should be provided.

5) The human body must not touch two threads at the same time.

6) The live part is only allowed on the side of the staff.

This website solemnly declares: This article is the reprint of the online media, only represents the author's point of view, has nothing to do with this site. If news articles and comments infringe your legal rights, please call us and we will handle it in a timely manner.