Pressing universal manual rolling die

After use in the flood season, the effect is good. The board is fixed on the pillar. The installation height is ergonomic. The upper mold is formed into a replaceable part. According to the variety of the pressure ring, the forming lower mold is fixed on the roller by the Screw. The ball bearing can be moved in the long groove of the handle by the adjusting device, and the handle can be rotated around the shaft through the bearing seat.

8.9. Forming the upper jaw 10. Forming the lower 1 1.12. Bearing B bearing seat 14. Gland 15. When the fixed pin 16 is used, install the upper and lower molds of the selected specifications, and then tighten the wedge. The end of the pressure ring blank is tangentially placed into the groove of the forming upper mold, and the head of the pressure ring blank is pressed by screws to adjust the position of the roller. 1 Rotate the small handle blank into the groove of the forming upper mold, and continue to rotate the handle 23 times. The pressure ring can be formed. Loosen the wedge to remove the forming upper die and press the ring to remove it.

As with other coils, the press ring needs to be rounded due to the impact of the rebound.

For the 13-structure press ring, after welding, the weld joint can be calibrated in the welded tire, and finally the weld be smoothed.

For a 3-structure press, just round the circle.

By changing the shape of the upper and lower molds and adjusting the position of the rollers, you can create a variety of non-conformation. Welcome to visit the small and medium-sized motor magazine website.

Soap Rack/Holder

soap rack,soap holder,soap stand,stainless steel soap holder,steel wire soap stand,etc.Let your bathroom become more simple and upscale!Applicable to families, hotels, home stay and other places to use.