Touch Kitchen Faucets,Touch Kitchen Faucets Price,Touch Kitchen Faucets Product Yuyao Zelin Sanitary Ware Co., Ltd , https://www.zelinsinkfaucet.com
1 Work closely around the main points of the work of the General Conference and complete the tasks assigned by the General Conference
1.1 Communicate the spirit of the General Meeting in a timely manner and implement the guidelines of the General Conference
On March 25, 2014, the General Assembly held the first meeting of the Secretary-General at the China Science and Technology Hall in Beijing, which raised five issues for the Association to strengthen its own construction and transformation and upgrading. It is required that the club should be able to fulfill the functions of providing services, reflecting demands, and regulating behaviors. Emancipate the mind, change the concept; clarify the role, find the right position; innovate and pragmatic, positive behavior; adapt to the transformation, comprehensive construction.
Our club will make full use of the four-time executive directors' expansion meeting held in Jinghong, Yunnan on April 23, 2014, and the website and website of the association to carry out vigorous publicity and timely convey the spirit of the general meeting.
1.2 Actively recommend to the higher level to solve industry problems
At the end of 2014, when the diamond enterprises in the industry exported diamonds through Shanghai Customs, they encountered difficulties in exporting through the Shanghai Diamond Exchange. After receiving the appeals of the enterprises, the clubs actively reflected to the General Conference and contacted the General Administration of Customs through the General Administration. , made some progress.
1.3 Actively participate in CCMT2014 and prepare for CIMT2015 exhibition, organize exhibitors to write testimonials
The exhibition is one of the main ways for the industry to show technological development, enterprises to promote product sales, and the association to do practical things for enterprises. It is also the main channel for the economic sources of the General Conference and one of the key points of the work of the General Conference. My club has always attached great importance to this event. CCMT2014 exhibitors 15 companies, the exhibition area of ​​282.5 square meters, the exhibition area is further expanded compared with previous years; during the exhibition, my club actively communicated with the parties, distributed information, promoted superhard materials clubs to industry colleagues, and developed member units.
CIMT2015 applied for 25 enterprises with an area of ​​667 square meters. Due to the limited distribution area of ​​the general meeting, 22 exhibitors were finalized with an exhibition area of ​​264 square meters.
1.4 Actively organize enterprises to participate in the “Top Ten Enterprises†declaration of advanced members, and encourage the industry to produce more boutiques and famous brands.
Since the establishment of the “Top Ten Enterprises†appraisal work, our club has actively organized enterprises to participate in the annual membership. The member companies are famous on the list every year. This activity has greatly promoted the establishment of corporate brand awareness and efforts to create quality products. In 2014, our branch Zhongnan Diamond Co., Ltd. was awarded the title of “Top Ten Product Quality Enterpriseâ€.
1.5 Strengthen learning and exercise, improve service ability
Strengthening the construction of the club is one of the key tasks of our unremitting efforts. Perfect organization and high-quality staff are the basic guarantee for doing a good job in the association and giving full play to the role of the association. As always, we ask our staff to step up their study, not only to learn about national policies and regulations on industry development, but also to learn industry expertise, especially new technologies and technologies for the manufacture of superhard materials and products. It must have a fairly theoretical level and a broad range of expertise. Understand and master the development of the industry, exercise and improve the level of organizational coordination in practical work, and improve the ability to serve members. Through various activities planned by the club and various technical materials compiled by the organization, the staff's organizational coordination, text editing, advertising design, publishing and publishing capabilities have been greatly improved, and high-quality publications have improved the society of my club. Influence, cohesion and combat effectiveness.
2 Complete the club change on time and improve the club organization
2.1 Keep up with the development of the situation and adjust the membership structure in time
The speed of technological advancement and the changing market have led to the continuous rise and fall of enterprises, especially small ones. Enterprises that continue to develop and master high-tech, pay attention to the development of two markets at home and abroad continue to grow and develop, while those with backward technology, low added value of products, single market and weak development are constantly declining, some are difficult to survive, some are discontinued or Conversion. Some companies do not understand, support, or participate in the work of the association due to changes in leaders. The club should continuously strengthen the role of the propaganda association and constantly adjust the membership structure as the situation of the company changes, replenish fresh blood in a timely manner, and constantly vomit and renew the new, thus ensuring the vitality of the club. In 2014, the club absorbed a total of 16 new member units: Rizhao Haien Saw Industry Co., Ltd., Henan Yige Abrasives Co., Ltd., Jiangxi Zhongli Superhard Materials Co., Ltd., Shanghai Yuhe Diamond Tools Co., Ltd., Zhuhai City Polycrystalline Diamond Enterprise Co., Ltd., Zhuhai Jingjing Trading Co., Ltd., Changsha Yule New Material Technology Co., Ltd., Luohe Aida Superhard Material Co., Ltd., Beijing Almaz Technology Co., Ltd., Zhengzhou Ruili Superhard Material Co., Ltd. Zhengzhou New Material Industrial Park Management Committee, Zhengzhou University School of Materials Science and Engineering, Henan Xinhang Technology Co., Ltd., Henan Houde Diamond Technology Co., Ltd., Tianjin Baolixin Superhard Materials Co., Ltd., Henan Botai Shengla Machinery Co., Ltd. timely adjusted and improved the membership structure to ensure the vitality of the club. There are also a number of companies actively requesting to join the association and are arranging for review and approval.
2.2 The leadership of the club will be successfully renewed and the transition will be completed.
The fourth session of the club ended in October 2013. Due to the limited activities such as the international seminars held in the 2013 branch, the energy was limited. Therefore, after the discussion and approval of the fifth meeting of the fourth session of the fourth session in 2013, the special general meeting applied for an extension. Change to 2014. In order to fully embody democracy and voluntariness, the branch secretariat collected the registration of the fifth director and above from all members in January 2014 in Super Concord (2014) No. 001. After registration and collection, it was held in April 2014. The six executive directors expanded the meeting to vote for pre-selection. After the pre-selection, according to the voting results, the chairman's communication meeting was held in June 2014, and the second round of voting was conducted on more than half of the candidates selected by the vice-president. Tickets, at the end of June, made a third round of voting on the three units. The directors and 66 candidates were identified. The club held the fifth general meeting in October 2014 to conduct the voting. All the candidate units were successfully elected. The final result is: 66 directors and above, including 1 director unit and 20 vice president units. There are 22 standing director units and 23 governing units. Zhengzhou Abrasives Grinding Research Institute Co., Ltd. was re-elected as the fifth chairman unit of Superhard Materials Association, and General Manager Qiu Lihua was appointed as the new chairman. As the fourth secretary-general Li Zhihong was close to retirement, Qiu Lihua, the chairman of the board of directors of Zhengzhou Abrasives Grinding Research Institute, nominated Zhao Bo as the new secretary-general. The conference applauded the proposal.
3 Conduct colorful club activities based on the characteristics of the industry
3.1 Preparation for the 6th Executive Directors' Expanding Conference and the Cross-Strait Superhard Materials Development Symposium to report on the development of the industry
In order to prepare for the re-election, summarize the work in 2013 and deploy the work in 2014; promote the sustainable and healthy development of the super-hard materials industry; promote the exchange of super-hard materials industry across the Taiwan Strait, and after research and accept the suggestions of Taiwan counterparts, on April 23, 2014 in Yunnan Province Jinghong City held the sixth executive director (expansion) meeting of the 4th Superhard Materials Branch and the symposium on super-hard materials development across the Taiwan Straits. More than 100 representatives and industry experts from the super-hard materials industry from all over the mainland and Taiwan participated in the event.
The meeting was presided over by the then Secretary-General Li Zhihong. At the brief opening ceremony, Qiu Lihua, the executive deputy general manager of the 4th Chairman of the Board of Directors of Zhengzhou Abrasives Grinding Research Institute Co., Ltd., first gave a speech, followed by Chairman of the Board of Directors of China Nonferrous Guilin Mineral Geology Research Institute Co., Ltd. Lu Zhi, and Senior Manager of R&D Department of Taiwan Diamond Industry Co., Ltd. Chen Zongqi also spoke separately.
After the brief opening ceremony, Secretary-General Li Zhihong made a "Summary of the work of the Superhard Materials Association in 2013", "2014 Super Hard Materials Association Work Plan and Recent Major Work Arrangements" and "2013 Super Hard Materials Industry Products and Import and Export Statistics Data" and many other work reports. In the “Statistics on Import and Export of Products in the Super-hard Materials Industry in 2013â€, Secretary-General Li Zhihong specifically pointed out: “Due to the weak development of the international economy, the growth rate of domestic economy has slowed down, the demand in the domestic and international markets is insufficient, and the growth of the super-hard materials industry Affected and slowed down, enterprise development is facing unprecedented pressure. Today, we are everywhere to promote that China's diamonds have reached the world's advanced level. Today, China's products are mostly occupied by low-end and mid-end markets, and domestic and international high-end markets are still controlled by developed countries. Domestic products are homogeneous. It is more serious, and industry self-discipline and product structure adjustment have become a top priority." However, Secretary-General Li Zhihong also pointed out: "The long-term development of China's super-hard materials industry is still bright. Strengthening R&D, transformation and upgrading, hard work and continuous innovation are the foundation of enterprise development. Studying the market, discovering gaps, and taking the differential development path is The blessing of enterprises; avoiding toddlers, losing yourself, blindly repeating construction, blindly expanding production capacity, and the consequences are worrying."
At the meeting, the election of the new board of directors and the above candidates was conducted. The meeting adopted on-site voting and on-site counting of votes. Each of the members of the fourth board of directors and above sent a representative to vote. The staff of the inspecting team made statistics on the spot. Finally, the results of the voting were announced by the secretary-general. At the meeting, it issued 42 votes and reached more than two-thirds of the requirements of the governing unit. The result was legal and valid.
In the afternoon, the invited industry experts gave a special report on the application of super-hard materials. First, Prof. Fu Yucan from Nanjing University of Aeronautics and Astronautics gave a report on “Abrasive Processing Technology for Aerospace Materialsâ€, followed by Professor Jiang Zhigang of Jilin University. A report entitled "Application of Superhard Materials in the Automotive Industry" was made.
After a brief break, Mr. Chen Zongqi of Taihang made a report on "Analysis of Taiwan Diamond Tools Market", detailing the development status of Taiwan's diamond tool market and Taiwan's diamond tool products in the semiconductor industry, silicon wafers, sapphire cutting, and LCD glass panels. Processing applications in other aspects. At the end of the meeting, Wang Xin, director of the Zhengzhou New Materials Industrial Park Management Committee, made a special report on “Patent Leading Innovation and Developmentâ€. The conference played an important role in promoting the sustainable and healthy development of the super-hard materials industry and promoting the exchange of super-hard materials industry across the Taiwan Straits. The meeting was successfully completed after all the agendas were completed.
3.2 Preparation for the 5th General Assembly and the 5th Session of the 1st China Superhard Materials Technology Development Forum
On October 15, 2014, the 5th Member Congress and the 5th Board of Directors were successfully held at the Yunding International Hotel in Taiyuan. The main topics of the meeting are: 1. Review the work report of the fourth session of the Council; 2. Review the financial report of the fourth session of the Council; 3. Review the report on the revision of the charter of the Superhard Materials Branch; 4. Introduce the change to the General Assembly. Preparatory process; 5. Review the financial management system of the Superhard Materials Branch; 6. Review the membership fee standard and payment method of the Superhard Materials Branch; 7. Read the approval document of the General Conference on agreeing to change the Superhard Materials Branch; 8. Vote for the fifth The leading bodies at all levels; 9. The new chairman of the board nominates the secretary-general and is considered and approved by the General Assembly; 10. Honoring outstanding members. On the evening of October 14, the last meeting of the fourth board of directors discussed and approved the above issues and election methods.
The number of people attending and attending the conference was about 220. The total number of small desktop exhibitors and unregistered visitors was nearly 250. It is another grand event of the Superhard Materials Branch following the international conference held last year. The meeting was chaired by Li Zhihong, secretary general of the Fourth Council. On the rostrum, there are executive vice president Mao Yufeng, the chairman of the fourth session of the club and the leader of the vice president unit.
The meeting was first addressed by Zhu Feng, the chairman of the 4th Board of Directors. He said in his speech: The Fifth Council will be established soon, and the new Council will carry greater responsibility and hope. I hope that all colleagues in the industry, bearing in mind the mission, high-spirited, joint efforts, innovation and development!
Subsequently, Li Zhihong, Secretary-General of the Fourth Council, made a report on the work of the Council. During the term of the fourth session of the Board of Directors, it not only successfully completed the tasks of the General Assembly, but also contributed to the healthy development of the industry, the improvement of the core competitiveness of the member units, the development of the international and domestic markets, and the acceleration of the great goal of becoming a superhard material power. .
The report also pointed out the shortcomings of the work of the club and the need to strengthen and improve. He hopes that the forthcoming Fifth Council will continue to carry forward the fine traditions of the Fourth Council, overcome the shortcomings of the Fourth Council, contribute to the development of the superhard materials industry, and become China's world power in the superhard materials industry. The goal is to work tirelessly!
Yin Yuhang, Chairman of the 4th Vice Chairman of the Board of Directors of Guangdong Benlang New Materials Co., Ltd., made the financial report of the 4th Board of Directors and the revised report of the association's articles of association.
Mao Yufeng, executive vice president of China Machine Tool & Tool Industry Association, read the approval document for the reelection. The general meeting hopes to further strengthen the organization of the club and enhance the cohesiveness of the club. In particular, we must pay attention to the new ideas and methods for accelerating the development of members and standardizing the management of chapters under the new situation, and fully play the role of the association in providing services, reflecting demands and regulating behaviors for industry enterprises. Make new contributions to promote the transformation and upgrading of the industry and achieve sustainable development.
The four-time Secretary-General Li Zhihong gave a detailed introduction to the preparatory process for the re-election work, ensuring that the entire preparatory process was reflected in and throughout the democratic, voluntary, fair and just.
During the counting of votes, the 4th Secretary-General Li Zhihong read the “Decision on Recognition of Outstanding Members†on behalf of the 4th Board of Directors, and commended 45 units in three grades: 5 outstanding members and 1 outstanding members. There are 12 awards and 28 outstanding member awards. The conference held a grand awarding ceremony for the award-winning enterprises.
After the election of the meeting, the final election results were: 96 votes were issued, 89 valid votes were returned, and the candidate with the least number of votes was 82. All the candidates were successfully elected. There are 66 directors and above, including 1 director unit, 20 vice president units, 22 executive director units and 23 governing units. Zhengzhou Abrasives Grinding Research Institute Co., Ltd. was re-elected as the fifth chairman unit of Superhard Materials Branch, and General Manager Qiu Lihua was appointed as the new chairman of the board. Zhao Bo was appointed as the new secretary-general.
In his speech, Qiu Lihua, the new chairman of the board of directors, expressed gratitude to the previous councils, the governing units and the directors for their great support and help to the work of the association. As the chairman of the club, they will strengthen their study in the future and unite with the deputy directors. All the directors and comrades of the Secretariat will do their best to do their best for the progress of the industry. Zhao Bo, the new secretary-general, also said that he will conscientiously implement and implement the tasks of the board of directors, and wholeheartedly do their duty for the government departments, do their best for the member units, do their best for the development of the industry, and work diligently for the self-construction of the industry associations.
The Executive Vice President Mao Yufeng finally made a concluding speech. He emphasized that the function of the association in the new era is to provide services, respond to demands and regulate behaviors. Our association must achieve the goal of transformation and upgrading, and the most important thing is to change concepts. In the future work, the new super-hard chapter leadership organization should fully reflect the four awareness of strengthening the general awareness: membership awareness, market awareness, service awareness, openness consciousness, and the transition, transformation and development of associations in the new era. , bold innovation, standard behavior, provide satisfactory services to the industry, gain industry recognition, and truly play an irreplaceable role in the development of the industry.
On the morning of the 15th, the 5th member representative assembly of the Superhard Materials Branch and the 5th Board of Directors successfully closed after successfully completing all the agendas.
On the afternoon of October 15th and 16th, the 18th China Superhard Materials Technology Development Forum was held. A total of 21 experts and professors and young and middle-aged technicians from all relevant universities, research institutes and enterprises in the country preached 21 papers, which reflected the most cutting-edge research results of the industry. The development of ultra-hard nanocrystalline sintered bodies without additives, the development of diamond technology by microwave plasma CVD, the latest detection technology, and various related researches on composite superhard materials and superhard materials. The forum is rich in content and active in the seminar. It shows the effectiveness of the product structure adjustment in the industry in recent years. It also shows the vitality of the successor of the industry. The bright future of the industry has been perfectly interpreted in this forum!
Small tabletop booths were also available during the conference and forum. The exhibits and promotional materials exhibited were large single crystal, high grade coarse grain abrasive grade single crystal, high grade diamond micro powder, various super hard material grinding wheel products and diamond synthetic press model. Wait. After the meeting, exhibitors said that they were very satisfied with the results of the site, and they were very grateful to the exhibition platform built by the club. In the future, they will continue to vigorously support the industry and promote the progress of the industry!
On the afternoon of the 16th, the 18th China Superhard Materials Technology Development Forum came to a successful end!
3.3 Continue to actively carry out international activities and strive to promote domestic and international technical exchanges and cooperation
In addition to normal communication and information exchange with the United States, Japan, India, and South Korea, the main international activities carried out this year are as follows:
(1) Participate in the German grinding exhibition and discuss cooperation with Germany
In order to help industry enterprises explore the international market, the group participated in the exhibition (view) of the 9th German Grinding Technology Exhibition, and conducted in-depth exchanges on cooperation matters. A total of 20 super-hard materials companies were organized, an increase of 122% over the previous year. In addition to the exhibitors, they also organized a tour group. Most of the members were visiting the grinding exhibition for the first time. They praised the products and technologies of foreign advanced enterprises at the exhibition and saw the gap between themselves and the advanced level of foreign countries. The development of its own enterprises and products has greatly inspired and benefited a lot. The GrindTec organizers attached great importance to the Chinese pavilion and arranged a series of important activities. First of all, to the Secretary General of the Organizing Committee, Li Zhihong, the VIP guest presented a VIP card through his Chinese representative, Mr. Wang Hanan (the cardholder can enter and exit the exhibition hall free of charge during the exhibition period), and invited him to participate in the opening ceremony and arrange it in the front row. The location is seated. After the opening ceremony, Secretary-General Li Zhihong and the German organizers conducted a patrol of the various pavilions. When patrolling the Chinese pavilion, Secretary-General Li Zhihong highlighted and introduced the large single crystals of gem-quality diamonds produced in China to the German side, which aroused great interest from the organizers.
On the second day of the opening of the exhibition, the organizers arranged a special time to hold a discussion with us. First of all, the organizers extended a warm welcome to the Chinese pavilion and the visiting delegation. I hope that the Chinese pavilion can further expand and more Chinese companies participate in the grinding. Cut off. And hope to have Chinese grinding machine companies to participate. Secretary-General Li introduced the group work for this grinding exhibition branch, saying that the next time he will organize the exhibition group to a greater extent, and hope that the German Association can also participate in the 2015 Sanma Exhibition, especially the organization of grinding machine enterprises. I also hope that there will be more deeper cooperation in other areas. At the exhibition, the organizing committee distributed the publicity page of the 2015 Sanma Exhibition and the English version of the magazine “Diamond and Abrasives Engineering†to all exhibitors and interested visitors. Most of the people showed great interest in the three grinding exhibitions and achieved full propaganda purposes.
The group exhibition and visits were very successful and achieved the expected purpose. The delegates had a good exchange with foreign counterparts, suppliers and customers at the exhibition, and they were very successful and very satisfied with the exhibition effect and the tour group service. Both expressed their wish to participate in more similar activities.
(2) Participated in the Japan Machine Tool Show and discussed with the Japan Industrial Diamond Association
On October 30th and November 4th, 2014, the branch secretary Zhao Bo and senior consultant Li Zhihong went to Japan to participate in the 27th International Machine Tool Exhibition in Tokyo. Super Association members Henan Yuxing Huajing Micro Drill Co., Ltd., Shenzhen Yubao Diamond Tools Co., Ltd., Zhengzhou Diamond Precision Manufacturing Co., Ltd. set up booths, Jingri Diamond Industry Co., Ltd., Henan Huifeng Diamond Co., Ltd., etc. Visited the exhibition.
On the afternoon of October 30, Secretary-General Zhao Bo\Consultant Li Zhihong\Huajing Micro-Drilling General Manager Zhang Hongtao and the Director of the Japan Diamond Association, Mr. Kawashima Yuki, Secretary General Wu Tenglong, Vice Chairman, Ikei Ike, General Manager of Taiwan Diamond Tools Co., Ltd. Lan Minxiong, director of the Taiwan Abrasives and I Society, held a discussion. The symposium was chaired by Secretary General Wu Tenglong. On behalf of the Japan Association, President Kawashima first extended a warm welcome to the China Super Association. He expressed his willingness to continue to contribute to the exchanges between the two associations. Secretary-General Wu Tenglong introduced the development of the Japanese industry: Due to the weak development of the Japanese economy, the output value of the Japanese diamond industry showed great fluctuations in the first 10 months, but the development momentum in the second half of the year was good, and it is estimated that it will continue to grow at the end of the year.
Li Zhihong introduced the development of China's diamond industry to guests from Japan and Taiwan. He praised the positive results of the friendly cooperation between the two countries after years, especially after the appointment of Mr. Kawashima, and hoped to cooperate more closely in the future and make greater contributions to the common progress of the two countries. He emphasized the necessity and importance of strengthening communication and communication between associations and associations. The complementarity between the three parties is strong. The cooperation of industry organizations will create positive interactions between enterprises and promote the rapid development of enterprises in different countries and regions. Secretary-General Zhao Bo thanked the Japanese and Taiwan industry organizations for their support to the China Super Association for many years. She said, "I cherish our friendship very much. I hope that the two industry organizations will continue to support the work of China Super League during my tenure and continue to develop friendly exchanges. Brilliant prospects, making new contributions to the common development of the industry!"
The Secretary-General and his party successfully returned to China on November 5 after successfully completing their scheduled tasks.
3.4 Actively carry out industry professional skills appraisal work, and strive to cultivate high-skilled personnel with certificates
In 2014, the Mechanical Industry Vocational Skills Identification Abrasives Industry Sub-center continued to actively cooperate with the revision and improvement work of the abrasive manufacturing and abrasive manufacturing of the National Occupational Classification (Machinery Part) organized by the Center. After receiving the notice from the center, the author actively contacted experts in various fields to review the ceremony, record and organize the opinions of all parties, and submit the feedback to the center after the summary and the problematic occupation and job frame. .
In August, the sub-center introduced the relevant technical situation of the national vocational skills appraisal work of the machinery industry through the “Technical Seminar of Henan Province Superhard Materials and Products Industry Technology Innovation Strategic Allianceâ€, and increased the promotion of vocational skills appraisal in the industry. Strength.
In September, the sub-center organized personnel to participate in the training of the appraisers organized by the center. After systematically learning and appreciating knowledge, the two comrades, Zhang Beibei and Zhao Bo, passed the examination smoothly and obtained the qualifications of national vocational skill appraisers and senior appraisers.
In September, the sub-center based on the Henan Huanghe Cyclone Co., Ltd. site declaration, combined with the actual production situation of the company, through the skill contest competition, the actual practice test identification, is expected to complete the entire identification work in the first half of 2015.
At the end of 2014, the appraisal of Pingdingshan Yicheng Company's practical examination was completed. In combination with the results of the 2013 theoretical examination, a total of 28 people passed the appraisal. Among them, the abrasive manufacturing workers—the general abrasive micro-powder manufacturing industry, the primary 11 people, the intermediate 10, the abrasive manufacturing workers. ——8 ordinary abrasive micro-powder inspection workers. The materials have been prepared and submitted to the Center for approval.
Cooperate with the center, supervise and urge the six appraisal sites of the subordinates to complete the work summary at the end of the year and the declaration of the appraisal plan next year.
Actively promote mutual cooperation with local colleges and universities, complement each other's advantages, promote the extensive development of abrasive skill professional skills appraisal, and promote the advancement of manufacturing technology in the abrasives industry.
4 Strengthen statistical work, run industry yearbooks and various publications
In the magazine and regular publications, the Chinese version of the "Diamond and Abrasives Engineering" was completed in the first phase of the 1.2 million words, the English version of the first phase of 200,000 words, the "abrasives and abrasives communication" 12 issues of 800,000 words, "China Abrasives Industry Yearbook" 350,000 words, "The 18th China Superhard Materials Technology Development Forum Proceedings" a 450,000 words, "China Machine Tool Industry Association Superhard Materials Branch 20 Years Activity Album" a 150,000 words, "diamond sawing tools "One million words, "The Fifth Member Congress and the Fifth Session of the Council Meeting"
A book of 80,000 words.
"Diamond and Abrasives Engineering" was once again selected into China's core academic journal RCCSE, with a score of 15% of the 6448 journals.
In 2014, it compiled a total of 24 volumes of published materials, accounting for 4.23 million words. Provide the industry with a wealth of technical, economic and trade information.
5 Strengthen the construction of branch Internet sites and improve the level of information services
"China Superhard Materials Network" is the portal of the club, the main public opinion position of the club, and the information platform for industry services. Over the years, it has continuously filled up the content of technology, products, standards, economic and trade information, etc., and its influence has been continuously expanded. It has become an important window for domestic and foreign people to understand China's super-hard materials industry, and is one of the main channels for enterprises to communicate with the world. Relevant documents, meeting notices, and domestic and international news of the club activities were timely and online, and the multi-faceted information was quickly and widely transmitted. For the large-scale activities of the association, a special edition webpage will be organized to conduct special reports, which will not only facilitate the inspection of relevant industry personnel, but also serve as a paperless archive of the association. In 2014, the website attached importance to the market, integrated into the market and entered the company. The website staff not only actively participated in the meetings of the industry associations, but also actively participated in related trade exhibitions such as hardware, machine tools, stone materials, abrasives and abrasives exhibitions, and expanded the influence of the website. Good results. In 2014, the number of website views was 488,000 and the average access time was more than 6 minutes. In the whole year, 2,755 pieces of information were released. With the development of network technology, in order to further enhance the popularity of the website, Sina Weibo was opened to improve the promotion and authority of the website. A total of 4,727 users were concerned, and 4206 friends were posted on Weibo.
With the increasing popularity and influence of the association's website, 52 exhibition companies at home and abroad have taken the initiative to contact the cooperation. In 2014, they cooperated with 23 exhibitions and signed 29 cooperation exhibitions in 2015. Under the close cooperation of the editors and staff of the Ministry of Information, the marketing staff visited 22 super-hard materials companies throughout the year.
6 Conclusion
In 2014, under the leadership of the General Conference and the support of the general membership units, the club successfully completed the tasks assigned by the General Conference and the annual plan of the club. Focus on adjusting the product structure of the industry and improving core competitiveness, promoting technological progress in the industry, opening up domestic and foreign markets for member companies, strengthening industry self-discipline, informing the economic operation of the industry, discussing the development direction of the industry, guiding the healthy and sustainable development of the industry, and cultivating high industry Skills and talents have done some practical things, won the praise of the majority of member units, and also improved the quality of the staff of the Secretariat, and exerted the bridge and bond role of the association as much as possible, and achieved gratifying results. However, due to the lack of manpower and insufficient funds, it is deeply unsatisfactory to fully serve the members. There are many things that need improvement and improvement in the work. I sincerely hope that the general meeting and the general membership will not give pointers, so that the work of the club can be further improved.
Abstract In 2014, in the face of the continued downward pressure on the economy, the new government adhered to the exploration since last year, continued to innovate ideas and methods of regulation, and introduced targeted control measures on the basis of strengthening interval management. The macroeconomic operation is generally stable, and the main indicators are in a reasonable range,...
In 2014, in the face of the continued downward pressure on the economy, the new government adhered to the exploration since last year, continued to innovate the ideas and methods of regulation, and introduced targeted control measures on the basis of strengthening the management of the interval. The macroeconomic operation is generally stable, and the main indicators are in a reasonable range. Especially when the economic growth rate is moderately slowed down, the structural optimization effect is enhanced. The super-hard materials branch keeps up with the national situation, and has done a lot of work around the 2014 work points of the General Conference and the work plan of the club, and carried out a variety of activities: organized the fifth member conference of superhard materials branch and China in 2014 Superhard Materials Technology Development Forum and other large and small industry conferences 2 times; group participation in international exhibitions 2 times; group exhibitions 1 times (CCMT2014); participation in stone exhibitions 1 time; participation in training 4 times, participation in domestic academic conferences 1; organization training examinations 2 times; edited and published 24 magazines and informative books, accounting for 4.23 million words; newly absorbed 16 members. Focusing on the basic requirements of "providing services, reflecting demands, and standardizing behaviors", we will strengthen basic work, explore work innovation, and improve our own construction. The summary report is as follows: