Name : T-MOULDING Vinyl flooring (spc flooring,click spc flooring)
Market :Export to American,Canadian,European Market,Part Asia,Africa Countries.Australia Market
Warranty :10 years for commercial and 25 years for residential
Stone Plastic Composite vinyl flooring is more and more popular new style eco-friendly vinyl flooring. SPC rigid flooring is set apart from other types of vinyl flooring by its uniquely resilient core layer. This core is made from a combination of natural limestone powder, polyvinyl chloride and some stabilizers. T-MOULDING,PVC T-MOULDING,SPC T-MOULDING,WPC T-MOULDING JIANGSU PERFECT NEW MATERIAL TECHNOLOGY CO., LTD. , https://www.bffloor.com
Board Thickness : 4.0-7.0mm
Wearing Layer Thickness :0.3mm,0.5mm as regular
Surface Texture :Deep Grain,Wood Grain,Marble Grain,Stone,Carpet
Finish :UV-Coating
Installation :Click system(Unilin,Valinge)
Delivery Time :15-25 days
Size:6''*48''(150mm*1220mm)
7''*48''(182mm*1220mm)
9''*48''(230mm*1220mm)
9''*60''(230mm*1525mm)
Backing Foam :IXPE(1.0mm,1.5mm,2.0mm) EVA(1.0mm,1.5mm)
Density :2.07kg/m3
Surface :Wood Embossed,Deep Wood Embossed,Handscraped,Eir.
Usage :Bedroom,Kitchen,Basements,Home,School,Hospital,Mall,Commercial to use.
Features :Waterproof,Wear resistant,Anti-slip,Moisture Proof,Fireproof,durable, anti-scratch, anti-bacterail.
SPC vinyl is a luxury vinyl flooring option with a structurally rigid, 100% waterproof core. SPC is also known as rigid core vinyl, and we use these terms interchangeably. Rigid core engineered vinyl flooring is designed to look like wood or stone, but requires less upkeep.
This flooring is durable, waterproof, and perfect for DIY installation. It`s ideal for both home and commercial areas.
Single-screw pump features Single-screw pump due to structural and working characteristics, compared with the piston pump centrifugal pump, vane pump, gear pump has many advantages compared to the following: 1, can transport high solids content of the medium; 2, uniform flow rate pressure stability, low Speed ​​is more obvious; 3, the flow rate is proportional to the pump speed, which has good variable regulation; 4, a pump can be used to transport different viscosity media; 5, the pump installation position can be any tilt; 6, Sensitive items and susceptible to damage by centrifugal force and other items; 7, small size, light weight, low noise, simple structure, easy maintenance. The selection of single-screw pump Selection of pump specifications is based on the nature of liquid being transported and flow, pressure to determine, and the pump speed by the viscosity and corrosive liquid delivery, as the main parameters to choose, in order to ensure reliable operation of the pump. Pump design speed for the transmission of water or water similar non-corrosive liquids allow the maximum speed, in actual use due to the nature of the media and life requirements are different, the selection should generally be lower than the design speed. For high viscosity and medium containing particles, the design speed of 1 / 2-1 / 3 or lower is generally used. Low speed is good for pump wear. However, the wear rate of the stator decreases after use. At this time, the speed can be properly increased , To compensate for the decline in traffic is also a policy. Transmission medium temperature should be -10 ℃ ~ 80 ℃ in special cases up to 120 ℃. The normal pressure of each stage of the pump (one lead of the stator) is 0.6 Mpa, allowing up to 0.8 Mpa in a short period of time (less than 30 minutes), and gradually decreasing the volumetric efficiency at the same output pressure when worn. Pumping water maximum suction is 8 meters, the actual use of recommendations not exceeding 6.5 meters, when pumping high-viscosity media, should be positive pressure inhalation.