After using the bathroom for a period of time, many people would find that the wall of the bathroom began to leak, and the time was too long. The wall tiles were loose, detached, moldy and black, and other conditions began to follow and seriously affected our daily life. The quality of home and the beauty of the bathroom. So, what happens if you have a bathroom leak? Next Xiaobian introduced toilet trapping methods for everyone, hoping to help everyone. Bathroom leak reason In general, there are two kinds of leaks in the bathroom, which are caused by leakage of the water pipes and leakage of the waterproof layer. Therefore, to solve the problem of bathroom leakage, we must first check out what went wrong. Look at the direction of the clean water pipe first. If there is a water pipe at the leaking location, you can turn off the water lock in the house first and let the water in the faucet clear. If there is no trace of water on the wall after a while, you can judge the water pipe problem. If, after the shower, there is a leak on the back wall of the bathroom, and after a certain period of time it has been found that the leakage of the wall has improved, it can be judged that there is a problem with the waterproof layer. Toilet trapping methods 1, through the above reasons I leaked water, according to the actual situation to find your home bathroom leak is what kind of situation, find the most basic leak factor, and then choose waterproof material to do a backup. 2. Since the real cause of the leak has been found, the next step is to perform a waterproof construction on the leaked part. Dust, water, etc. on the surface are treated first and the surface is kept dry. If there is a tile in the leaked part, then you need to use a knife to draw a small groove, spray some penetrating water repellent on the tile surface, tile gaps and other places, be sure to spray evenly. 3, if the leaking water pipes cause the bathroom to leak, then we must find the joints of the water pipes, and carry out a sealing treatment. If there is a crack in the water pipe itself, it is necessary to replace the water pipe. After the treatment is completed, a new installation of the water pipe is to be carried out, and the waterproof layer within the water pipe should be repaired. 4, if there is a problem with the waterproof layer, need to find the waterproof layer of the problem, and then seal it with some materials such as water stop, and then waterproof construction, if the leak point is closer to the wall, then the waterproof layer should also be done To the wall, you need to shovel out the tiles on the one side, and wait until the water shutoff test is completed after the processing is completed. Then, re-lay the tiles after being reasonable. 5. After you have completed the most basic maintenance of the water pipe and repair of the waterproof layer, use some caulking paste to apply some of the broken and defective parts to the walls. Finally, it is the place where the ground and the wall are connected and the water-proof edge made of plastic steel mud around the water pipe. It is better to make the water-proof construction site do not pour water for 24 hours to make it more stable. Editor's summary: The toilet trapping method was introduced here, and I hope to be helpful to everyone. If you want to know more related information, you can pay attention to this website information. Bathroom toilet decoration bathroom trap
The 1700W Wall chasers are a twin bladed power tool which used to cut groove on brick, stone or concrete walls, perfect for electricians and plumbers, to lay wires or water pipes in the wall.
The 1700W Wall Groove Cutting Machine Chaser with Cutting Depth 0-28mm, cutting Width 14/19/29mm.
The Concrete Wall Cutting Machines With Spindle lock for easy blade change.
BTW, The Groove Wall Chaser Machine with Laser Function for cutting line straight.
The Wall Chaser work efficiency is much higher than the 5 blades wall chaser, and Less Dust with dust blower.
The Wall Cutting Machine is comfortable to use, due to anti-slip handle with soft grip cover.
The 1700W Brick Wall Chaser With Guide handle for easy work with little effort.
The Wall Chaser with robust metal protective hood and Soft start function.
The Electric Power Wall Chaser With Connection of an external extraction system for dust-free work
Electronic overload protection for long service life
Starting current limitation prevents the actuation of the lock on start-up
Electronic soft start and restart protection for safe working
integrated damping system to reduce vibrations in order to protect the user's health
Electronic safety shutdown of the motor for safe working in case the disc stops unexpectedly
Wall Chaser Groove Cutting Mchine,Electric Groove Cutting Machine,Chaser Machine Wall,Wall Slotter Ningbo Brace Power Tools Co., Ltd , https://www.bracepowertools.com
