How to deal with non-slip floor ? There are several kinds of anti-skid materials on the ground ? In the home renovation, the ground must be taken into account when skid , so that in the cleaning of the residence is not easy to slip, but also to avoid the personal safety of the elderly at home. Then, Xiao Bian gave everyone a chance to share how the non-slip treatment of the ground was handled, as well as the introduction of several materials for anti-skid materials on the ground. How to deal with non-skid ground 1. First clean up the site and clean the floor. If there is wax on the surface of the floor, the wax should be removed with wax water first, and then the floor should be cleaned. 2. After cleaning, use anti-slip agent to spray evenly or use sponge to brush the floor. When anti-slip agent is used, shake the bottle several times and then apply it. Brushing should pay attention to, must be applied evenly, such as the dry surface should be timely moisturizing. 3. After brushing the anti-slip agent, wait for 8 to 15 minutes, then wash it with clean water, and then scrub gently with a brush or sponge. 4. After the completion of all non-slip treatment, it will naturally dry for 1-2 hours, if necessary, the water will stay wet. Finally, wait until it is dry before entering normal use. There are several kinds of ground anti-slip material 1. First, ground anti-skid curing series, such as elastic anti-slip sealant; 2. Second, single-component fast-drying epoxy anti-slip agent (single component, water-soluble, non-combustible, environment-friendly), HD synthetic rubber base anti-slip coating, synthetic rubber base transparent non-slip coating; 3. Third, non-slip surface treatment agent, toilet bathroom anti-skid treatment agent, industrial and mining ground anti-skid treatment agent; 4. The fourth, non-slip auxiliary products, non-slip rubber floor coating (multiple color selection), epoxy floor anti-skid coating (multiple colors); 5. Fifth, non-slip floor coating, HD epoxy anti-slip coating, epoxy transparent anti-slip coating, epoxy anti-slip coating and sealant, water-soluble epoxy resin coating; 6. Sixth, special anti-skid products, elastic synthetic rubber floor anti-skid coating, solvent oil floor cleaner; 7. Seventh, non-slip cleaning agent, SRC anti-slip base cleaner, TRA, strong load anti-skid base cleaner; 8. Eighth, non-slip from the spraying agent, such as the mechanism of epoxy resin anti-slip coating. The article concludes: Then, there are several problems concerning how to deal with non-skid ground and non-skid materials on the ground . We have already introduced all of the contents in this article and provided reference for everyone. I hope that by reading the above, we will know how to deal with non-skid ground in the future. , as well as know the type of ground anti-slip material. When you encounter such problems, you also know how to quickly find a solution. Komatsu Cab Parts,Komatsu Cab Door Parts,Komatsu Cab Genuine Part,Komatsu Excavator Cab Parts JINING SHANTE SONGZHENG CONSTRUCTION MACHINERY CO.LTD , https://www.stszcmparts.com
