48) ToolpathFeedrate The speed at which the reference point on the tool moves along the tool path relative to the workpiece. The unit is usually expressed in terms of the amount of movement per minute or revolution. Previous page Radius 25Mm Kitchen Sink,Stainless Sink,Corner Kitchen Sink,Small Kitchen Sink Zhongshanshi JiaBaoLu Kitchen And Bathroom Products Co., Ltd , https://www.gabalusink.com
49) Fixed Cycle (CannedCycle) Some preset operation commands. According to these operation commands, the machine coordinate sleeve is moved, and the main sleeve is operated to complete a fixed machining operation. For example, drilling, boring, tapping, and the combined action of these processes.
50) Subprogram A part of the machining program, the subroutine can be activated by an appropriate machining control command. 51) The processing sheet of the part prepared by the Planningsheet before the machining process of the part is prepared.
52) ExecutlveProgram In the CNC system, a set of instructions for establishing operational capability 53) Override allows the operator to manually modify the programmed values ​​of the speed (eg, feed rate, spindle speed, etc.) during machining. Features.
54) Servo-Mwchanisnt This is a servo system in which the controlled amount is the derivative of the mechanical position or mechanical position versus time.
55) Error The difference between the calculated value, the observed value or the actual value and the true value, the given value or the theoretical value. 56) Resolution The minimum interval that can be resolved between two adjacent discrete quantities.