Cork flooring can be divided into adhesive cork flooring and lock-up cork flooring. Cork floor structure diagram Paste-type cork flooring is generally divided into three layers, the top layer is wear-resistant water-based coating; the middle is a hand-polished rare cork layer, the layer is cork floor color; the bottom is engineering cork Grassroots. General specifications are: 305X305X4/6/8mm, 300X600X4/6/8mm, 450X600X4/6/8mm The lock-type cork floor is generally divided into six layers, the first layer on the top is wear-resistant water-based coating; the second layer is hand-polished cork layer, which is cork floor color; the third layer is first-level ergonomics Cork base layer; the fourth layer is HDF (high density density board) after 7mm; the fifth layer is the lock splicing system; the bottom sixth layer is the secondary environmental engineering cork base layer. The general specifications are: 305X915X11/10.5mm, 450X600X11/10.5mm In China, people generally use adhesive cork flooring, which is suitable for geothermal heating, and has a longer service life than the lock floor, and can be paved in the kitchen and bathroom. In Europe, people generally use lock-and-lock flooring, which is convenient and casual. This is closely related to the way Europeans consume, because Chinese people use the floor for a long time, and Europeans like to change the floor from time to time. Brass Faucet,Grab Bar Faucet,Tall Basin Faucets,Single Sanitary Brass Faucet Jiangmen Faer Sanitary Co.,Ltd , https://www.faersanitarys.com