Hydraulic Puller,Cone Mount Bearing Heater,Cone Bearing Heater,Bearing Induction Heater Jiangsu JOBA Mechanical Manufacture Co., Ltd , https://www.jsjoba.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>The details of the bearing defects in the use of bearings The details of the fate of the bearing when it is used
Bearings exhibit the following shortcomings; they can no longer be used continuously; new bearings should be replaced immediately. Details are as follows: /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
(1) Cracks or notches on any of the inner ring, outer ring, roll body and cage of the bearing;
(2) Cracking on any one of the bearing ferrule and the rolling body;
(3) There are significant jams on the raceway surface, the ribs and the rolling body of the bearing;
(4) The bearing cage is worn significantly; perhaps the rivet is significantly relaxed;
(5) There is rust and injury on the raceway surface of the bearing and the rolling body;
(6) There are severe indentations and marks on the raceway surface of the bearing and the rolling body;
(7) There is significant creep in the inner diameter surface of the inner ring of the bearing or the outer diameter surface of the outer ring;
(8) The discoloration due to heat is significant.
Recommend to friends comments close window Bearing related knowledge Several methods for distinguishing automotive bearings: selection, measurement and application criteria for radial clearance of bearing axial clearance
SKF Bearing Smooth Grease Selection Considerations Bearings Early Damage Causes Analysis of Noise Caused by Bearing Manufacturing Factors and Countermeasures
This article links to http://
Please indicate China Bearing Network http://
Previous:Processing process for wind power bearing parts removal Next: Bearing device
Source: Bearing network time: 2012-12-30