Pvc floor mats is a floor mat made of polyvinyl chloride resin raw materials, which is actually made of polyethylene and copolymer epoxy resin as the key raw materials, adding fillers, viscosifiers, thickeners, additives and other auxiliary materials, by symmetrical mixing, coating technology or by injection molding, extrusion processing technology. pvc floor mat - The use of pvc floor mat from the end of the 80 period into the Chinese market, in China's first and second tier cities has been widely recognized, the application is very common, suitable for: home, colleges, hospitals, clinics, office buildings, factories, shopping malls, commercial services, sports venues and other office space. Anti Slip Pvc Floor Mat,pvc non slip mats,pvc non slip mat,pvc anti slip mat,plastic anti slip mat Jiangyin Yining E-Commerce Co., Ltd , https://www.nbpvcmatyining.com
Welcome to visit us.
In Dagang Oilfield No.4 Plant, the effect of liquid-air injection jet synergistic technology applied in the two wells of plate 808-7 and port 365-1 was obvious. The average pump efficiency increased by 24.47% and the daily oil output increased by 5.6t. The synergistic technique is based on controlling the hydrodynamic characteristics of oil and gas wells, especially in flow regimes, flow patterns, flow rates, and flow pressures, based on the principle that the hydraulic characteristics of multiphase flows (liquids and gases) are most influenced by the fluid regime The favorable bubble flow, which is well distributed in the liquid, can be achieved with this technique, which significantly reduces the static pressure loss by reducing the overall density of the lifting fluid By reducing the high velocity gas in the casing and the relatively low velocity liquid Between the friction can significantly reduce the dynamic pressure loss and improve the pump full coefficient, to achieve the purpose of improving pump efficiency Oil Production Plant in the two oil gas wells affected by the application of liquid gas injection jet flow synergistic technology, gas-liquid ratio From 132.36m3 / t down to 77.32m3 / t, to achieve the purpose of reducing gas, improve pump efficiency, oil well stimulation.