SUN YAT INDUSTRY LIMITED , https://www.ernte-eu.com
Security inspection machines are widely used in factories, subways, stations, airports and other public places with high passenger flow. They are mainly used to detect whether people carry precious metals and suspicious objects and whether they will cause harm to public places. So, what precautions do security personnel need to understand when using the security inspection machine? Now, Shenzhen Jinri'an will explain to you in detail:
Note 1: The security inspection machine should not be exposed to water. The installation environment should be dry and ventilated. If the environment is wet, waterproof measures should be taken. When the ambient temperature of the security inspection machine is lower than 5 degrees Celsius, it should be turned on and preheated 30 minutes in advance, and the water stains and ice cubes on the luggage should be removed before the luggage passes.
If the security inspection machine is used in an open field, it must be protected, such as building a canopy to prevent the security inspection machine from getting wet. The cost is slightly more expensive, but it will not shorten the life of the security inspection machine.
Main item two: within 1 meter of the security inspection machine, there must be no large metal objects such as large iron doors, elevators, large iron columns, etc., or metal objects that interfere with the security inspection machine, which will bring the security inspection machine to use Inconvenient.
The installation of the security inspection machine must be fixed firmly to avoid shaking caused by strong winds or collisions, and there must be danger warnings to prevent unnecessary dangerous injuries caused by radiation when people pass by.
Main item three: Some things with magnetic fields must be far away from security inspection machines, such as distribution boxes, motor equipment, etc., because these magnetic fields are likely to cause interference to the use of security inspection machines. Please use the marked voltage of this machine, in order to prevent leakage, please connect the leakage protector before connecting to the power supply.
Note 4: The security inspection machine in a fixed public place must be guarded by someone in use. For example, when people pass, they insist on single pass, and don't let many people pass at once, to avoid crowding and damage to the security inspection machine, so that the security inspection machine can not work normally.
Note five: daily maintenance. Before using the X-ray machine, check whether the shell panel, display, keyboard and cable of the device are damaged, whether the machine is placed smoothly, and then check whether the roller runs smoothly. Before powering on the system, you must check that the lead curtains used to prevent X-ray leakage at the entrance and exit of the channel are intact. If damaged, they must be replaced immediately. Check whether the conveyor belt is intact and whether there are any thorns or smudges that harm the checked baggage. The machine's LCD screen is forbidden to rub or hit by sharp hard objects, and check whether the lock on the operating table is damaged by unauthorized persons. Check that all the casings of the machine are covered, and check whether the power socket of the equipment is reliably grounded.
Note 6: The person in charge is responsible. Any debugging and maintenance of the security inspection machine must be operated by professional technical personnel. Without permission, no modification or addition of any accessories is allowed, otherwise the manufacturer will not guarantee. If you encounter any problems in the process of using the security inspection machine, if you can't solve it yourself, don't turn it on without permission, and contact the staff of the original manufacturer of the security inspection machine as soon as possible to deal with it.
The above are some items that need to be paid attention to when using the security inspection machine. After that, Shenzhen Jinri Security Inspection Factory reminded everyone again: After using the security inspection machine for one day, you can power off the security inspection machine for two or three hours when it is not in use, because the parts inside are in a high temperature state for a long time. Prevent excessive use of security inspection machines for a long time to extend the service life of security inspection machines.