2. If the mortar is dropped together with the tiles, first lightly plucking some of the pits on the original foundation surface, re-embedding with mortar mixed with 107 glue, or using cement, E-44 epoxy resin, acetone, ethylenediamine (Available at the chemical store) After mixing at a ratio of 5:3:2:1, brush a layer on the base surface with a brush and press the peeled tile up until the mortar hardens. It should be noted that if the tiles only partially fall off, do not use force to hit the mortar on the foundation surface to prevent vibrations and loosen the original solid tiles. Tile Tiles Cement Home Decor Tiles Plastic Home Decor Fireproof Glass,Tempered Fireproof Door,Fireproof Glass Windows,Fireproof Interior Door Huaian Hongrui Glass Co.,Ltd , https://www.hongruiglass.com
In the modern home decoration, the application fields of wall tiles are more and more extensive. However, due to various reasons, after the wall tiles are used for a period of time, the local tiles often vacant or even fall off, which not only affects the effect of use, but also leaves a block of unsightly “scars†on the complete wall and ground. If you encounter this situation, you may wish to use the following methods to repair: First, if the mortar is not loose, only the tiles off, you can scrape off the mortar on the back and around the tiles, in 107 glue mixed with a little cement into a paste Apply a thin layer evenly on the back of the tile, and press it tightly later to stick it.