Entrance decoration restaurant decoration paint home decoration glass decoration space decoration partition painting wall kitchen glass sliding door 19X7 Non-rotating SS Wire Rope The service life of the steel wire rope is proportional to the fatigue life. According to the approximate price of the steel wire rope market, the price of the manganese-based phosphating Coated Steel Wire Rope is about 1.4-1.6 times that of the smooth steel wire rope, and the service life extension is much higher than the price increase. Therefore, the average daily use cost of phosphating coated steel wire rope is only 30-45% of that of smooth steel wire rope, the use cost is lower, and the cost performance is higher.
Therefore, the phosphating coated steel wire rope has a long service life and a lower cost of use, and the smooth steel wire rope must be completely eliminated. This is the general trend and the development trend of steel wire rope manufacturing technology.
Non Rotating Wire Rope,Rotation Resistant Rope,Anti Rotation Wire Rope,Rotation Resistant Wire Rope Jiangsu Hongze Stainless Steel Wire Rope Co., Ltd , https://www.hzrope.com
How to choose ceiling and ceiling decoration materials The decoration of ceilings is often the first job of home decoration. From the process point of view, most construction teams will begin with the construction of smallpox. Smallpox (Board), also known as ceiling or top grid. It is customarily called "smallpox" or "ceiling." The ceiling decoration materials are the main basis for distinguishing the name of smallpox, mainly including: light steel keel plasterboard ceilings, gypsum board ceilings, splint ceilings, profiled elongated aluminum buckle ceilings, square plated aluminum buckle ceilings, stained glass ceilings, etc. . For ceilings made of aluminum gussets, we usually call it "aluminum gusset ceilings". Here, we take a look at the characteristics of various smallpox. 1. Light steel keel gypsum board ceiling gypsum board is made of cooked gypsum as the main raw material mixed with additives and fibers, with light weight, heat insulation, sound absorption, non-combustible and sawing and other properties. Gypsum board and light steel keel (pressed by galvanized sheet steel) combined to form a light steel keel gypsum board. Light steel keel gypsum board ceilings have a variety of, including a paper gypsum board, decorative gypsum board, fiber gypsum board, hollow gypsum board slats. There are many specifications available on the market. From the current point of view, the use of light steel keel plaster ceilings as a partition wall is used to make smallpox. 2. Gypsum board ceilings are mostly used in commercial spaces and are commonly used in 600×600 specifications, with the distinction between the clear bone and the dark bone. Keel often uses aluminum or iron. 3. Splint ceilings are currently used in decoration. The plywood (also called plywood) is made by steaming and softening the logs, cutting large sheets along the annual rings, and drying, arranging, gluing, forming, hot pressing, and sawing. With light material, high strength, good elasticity and toughness, impact resistance and vibration, easy processing and finishing, insulation and other advantages. The ceiling is usually made of 5% splint, 3% is too thin for easy arching, 9% is too thick. The reason for its popularity is that it can easily create a variety of modeling ceilings, including curved, round, and even more. However, one drawback is the fear of termites. The remedy is to spray termite-resistant potions. 4. Shaped aluminum buckle plate ceiling decoration has mostly no longer use this type of material, mainly not resistant to dirt and easily deformed. 5. Square plated aluminum plate ceilings are used in places that are easily contaminated, such as kitchens and toilets, and are currently the mainstream products. 6. Stained-glass ceilings This type of ceiling has a variety of patterns. The interior can be fitted with lighting devices, but it is generally used only locally. In addition to material selection, ceiling decoration is mainly a problem of the proportion of shape and size. The former should be specifically dealt with according to specific circumstances, while the latter must be calculated based on ergonomics and aesthetics. From a height point of view, the home interior clearance height should not be less than 2.6 meters. Otherwise, try not to shape the ceiling, but use plaster lines. If the decoration light steel keel plaster ceiling or splint ceiling. When painting the surface, the joint should be sealed with gypsum powder, then sealed with kraft paper and then painted and painted. The construction of smallpox, no matter what kind of material, should be remembered: Sealing! To prevent rats and cockroaches from doing nesting in it