The correct color matching method of latex paint The color adjustment steps are as follows: 1. Analyze and find out the type of color paste required for formulated colored coatings. 2. Slowly add the desired color paste under stirring, stir evenly after adding a color paste, and then add the second sample. Compare samples with the sample at any time. It should be reminded that the dry and wet films of latex paint have a large color difference, and the dry film has a darker color than the wet film. Therefore, attention should be paid to the comparison of the same conditions in order to ensure that the hue of the paint is consistent. 3, coloring should be based on the first anti-depth, and then find the principle of color, dark color paste to avoid formula error is too large. 4, the color paste is easy to produce precipitation, in the color before mixing should be used before mixing, so as not to formula error is too large. 5, regardless of the amount of colored paint, the best use of the same tank with the guard, so as to avoid color, if a tank with difficulty in deployment, it should also be deployed in batches, then the proportion of each batch to be mixed, stir before use to ensure The color is uniform. coating
SBS prefabricated building is a new type environmental friendly product that adopts steel structure as frames, various plates and panels as surrounding protection system, high strength bolts as component connection. The metal frame buildings are mainly used as modular house, office, cleaning workshop, cold storage room, wide span workshop, warehouse, exhibition hall,stadiums , hangars, steel-structure supermarkets, high-rise steel constructions, logistics center, container house and so on.
Steel Garage,Container House Garage,Large Parking Platform,Steel Structure Metal Garage Foshan Shengbang Steel Structure Co.,Ltd , https://www.sbsstructure.com
The latex paints usually sold in the market are mostly white and light-colored, and the amount of dark-colored paints is relatively small, and most of them are used in special parts or exterior walls. Architectural paint production plants produce white paints and colored paints in various colors. Usually, after the white paint is ready, the paint of the desired color can be self-aligned, and the color paste with a fineness lower than that of the finished paint can be purchased from outside and can be prepared by itself.